How do you cut an old sewer pipe?
Quote from the video:
Quote from Youtube video: How to cut cast iron sewer pipe you can use either a grinder or reciprocating. Saw i prefer a reciprocating.
How do you get a pipe out of concrete?
Ways to clear concrete from drains
- Flush. If the cement has accidentally (and recently) been put into a drain flushing it with plenty of water may be a simple but effective fix. …
- CCTV inspection and high-pressure jet blasting. …
- Mechanical tools. …
- Biodegradable, cement-softening products. …
- Acid.
How do you remove a sewer cap in a basement?
Quote from the video:
Quote from Youtube video: Use a heat shield got any area that's a concern that you might hit with the propane torch. But what we're going to do is we're going to heat this up just around the outside edge.
How do you cut a concrete sewer pipe?
Quote from the video:
Quote from Youtube video: But the secret is to cut clean through the concrete your partner saw will cut anywhere from four to six inches depending on the size of the blade.
Can I use a grinder to cut cast iron pipe?
The one tool you can use and likely have on-hand is an angle grinder. While you could use a reciprocating saw or even a hacksaw to vigorously slice your way through cast iron, utilizing an angle grinder to swiftly cut segments of cast iron pipe, is a viable option too.
How do you replace a sewer line under a concrete slab?
Quote from the video:
Quote from Youtube video: Down the cut ahead at the end of the drain snake will scrape the inside of the pipe. And remove the last of those tree roots to leave a nice clean pipe.
How do you find a sewer line under a concrete slab?
Quote from the video:
Quote from Youtube video: So what it is is it puts a signal into the line or conduit you're trying to locate and then with this wand you're able to go along and detect it under the slab or underground.
How do you cut PVC pipe in concrete?
Quote from the video:
Quote from Youtube video: Once you go all the way through you're going to want to go around in a clockwise. Direction applying pressure towards the outside to keep that blade pushed against the outside. Go all the way around.
How do you cut a basement floor for plumbing?
Quote from the video:
Quote from Youtube video: The skill saw in with the the diamond blade that we have on here for cutting concrete.
How do you cut a trench in a concrete slab?
Cut the concrete as based on your guide cut, rotate the depth handle to lessen the blade sharpness if needed. Slowly push the saw forward until the first edge of the trench is cut. Raise the blade then pull the saw back to the end of the trench and cut the second edge similar to what you did with the first edge.
Can you cut clay pipe with a Sawzall?
Quote from the video:
Quote from Youtube video: Now. There's a handful of ways you could cut terracotta or clay pipe. You could use an angle grinder. With a diamond wheel. On it you could use a circular saw with a masonry blade on it.
Can I cut cast iron pipe with a Sawzall?
Yes. Cutting cast iron with a sawzall is an efficient way to cut cast iron. Many contractors, handymen, and homeowners own reciprocating saws. If you already own the tool, all you need is the blade designed for cutting cast iron.
How do you remove a cast iron soil pipe?
Quote from the video:
Quote from Youtube video: So we're able to break the hub of pipe it was a hammer and I'll kind of show you how it comes up i real quick. Alright we already started to smash off the belt here so we can get this cast out.
What is the most efficient tools for cutting cast iron pipe?
Cast-iron pipe snap cutter. For DIYers who need to make just a couple of cuts for a splice, a reciprocating saw or a grinder is a better option than a snap cutter. Both tools will cut cast iron with relative ease, if not as quickly as a snap cutter, and they work in tight spaces.
Can cast iron be cut with a hacksaw?
Hacksaws
If you have a good, old-fashioned hacksaw, you can use it to cut your cast-iron pipes. But keep this in mind: using this tool requires you to exert maximum effort and can result to a lot of hard work. It also takes a substantial amount of time, especially if you have several pipes to cut.
How do you break cast iron pipes with a hammer?
Hit the back of the chisel with a hammer. Move the chisel along the cast iron pieces while striking it with the hammer until the larger pieces break. Continue with the chisel and hammer until the cast iron breaks into manageable pieces.
Is cast iron hard to cut?
Cast iron is very tough and durable, and has been used in building construction for several hundred years. However, it also has a brittle nature, which is manipulated with a snap cutter tool when cutting through cast iron pipes.
How do you cut a metal pipe without a saw?
Quote from the video:
Quote from Youtube video: You can do the same. Thing. Cut right through it with a nice clean edge. Now with PVC pipe these cutters will only go up to about an inch and a half inch.
Can you cut cast iron with a multi tool?
Quote from the video:
Quote from Youtube video: Like a black plastic pipe it turns out that it looks like a cast iron. And didn't anticipate that but I've started to cut it and what I'm using is a multi master it's an oscillating tool anyhow.
