How do you remove a fence post spike?
The trick to removing a fence post is to apply force upward, so that you’re not fighting the strength of the earth on either side of the buried post. This can be done with a jack or machinery, or with a lever and some elbow grease. One of the best post-pulling techniques comes from Family Handyman reader Mike Barnes.
How do you remove post spikes from the ground?
Dig around the spike until you can pull & wiggle it out. Replace earth & either hit it back in with a hammer & a block of timber (in a slightly different location) keeping it straight as you do … or postcrete it back in straight depending on how permanent you want it to be.
How do I remove an anchor from a post?
If needed, a hammer can be used to knock the anchoring tube below the floor, and in some cases these tubes can simply be pulled out of the hole entirely. Male concrete anchors can be much more difficult to remove. If the hole beneath the anchor is deep enough, some anchors can simply be pounded into the ground.
How do you remove T-post stakes?
Quote from the video:
Quote from Youtube video: Until it latches over the top of the remover tool and then i'm going to put my foot against the back of the removal tool one hand at the top of the t. Post. One hand kind of gripping.
How do you remove a metal fence post?
Quote from the video:
Quote from Youtube video: So once the jack is in place just got tilt a little bit so the pipe wrench grabs. My pipe wrench has a bit some texture to it so it pretty decent you can see how. If you look at the ground.
How do you hammer in fence post spikes?
Quote from the video:
Quote from Youtube video: You want to just let the sledgehammer do the work for you you don't want to be swinging down really hard on top of this. Just light taps. And straight down on top.
How do you get metal stakes out of the ground?
Quote from the video:
Quote from Youtube video: Take one of the pieces of pipe. And stick it through the loop that you just made in the chain. Place the pipe up against the fulcrum. And apply downward pressure as close as you can get to the end.
How do you use a metal T post puller?
Quote from the video:
Quote from Youtube video: And you want to set the base. Right behind the fence post. It has the this u-shaped notch. And it's ridged so they can grip onto. These little teeth that are on the front of the t-post.
How does a post puller work?
Quote from the video:
Quote from Youtube video: To do so place the puller on the tipo so it grabs the grips on the post. So to its lowest setting. And start pulling you'll have to reset every few inches. And that's how you use a tee post puller.
How do you use a manual fence post puller?
Quote from the video:
Quote from Youtube video: With your lever-action. You just pull down. And what it does is it pulls your fence post up. So then you let go and you move this down to a lower stud on your fence.
How do I remove an old wood fence post?
Quote from the video:
Quote from Youtube video: So basically what you're gonna do is you're just gonna dig a hole on one side of the fence post. Like this dig that out you know pile the dirt up over here whatever.
How do I remove a wood fence post from concrete?
- Step 1: Remove Old Wooden Post. …
- Step 2: Dig around the perimeter of the posthole. …
- Step 3: Break up the Concrete Footing. …
- Step 4: Remove Remaining Concrete. …
- Step 1: Dig around Posthole perimeter. …
- Step 2: Insert Prybars. …
- Step 3: Lever the Footing out of the Posthole. …
- Step 1: Drill Pilot Hole into Post.
What is a fence puller?
With a fence puller, you’ll not have to wrestle rolls of fencing, pulling them tight only to find your fence sagging here and there. This tool takes just a few minutes to put together and will be worth its weight in gold the first time you put it to use.
How do you pull a fence?
Quote from the video:
Quote from Youtube video: So that we can pull this pencil to come along and just see if we can make it happen. As tight as we want. It. Long through here and make sure we're not I don't think we're touching the post anywhere.
How do you use a fence tool?
Quote from the video:
Quote from Youtube video: You can pull that fence around and use the hammer part to tack it back in place. It's also a fence puller so you have this hook area in the back end it's kind of handy to be able to pull that fence.
