How do you remove a water valve cap?
Put one hand on the cover and the other hand on the valve box and try to separate them. If you cannot pry up the cover, slide a flat-head screwdriver between the cover and valve box and try to pry it open.
How do you open a water valve cover?
Quote from the video:
Quote from Youtube video: Once you have your water meter key simply insert the key end into the key slot on the meter can rotate to the left and pull the lid up. If you have a concrete meter.
How do you remove a water meter cover without the key?
Quote from the video:
Quote from Youtube video: Box twist gently pry up remove the lid not to damage the wires. Take your crescent. Wrench. Place it on your stop make sure you have a good adjustment on it give it a twist.
How do you open a round water meter cover?
Valves located outside in an underground water meter box may require special tools to access them. To open the cover, you may need a pentagon socket wrench to remove a security bolt. Some bolts stick up far enough that you can use pliers to turn the bolt. Other covers have a “key hole” that require a meter key to open.
How do you change a water shut off valve outside?
Quote from the video:
Quote from Youtube video: The ferrule goes on to the outside of the copper pipe. And the pipe fits right down into the valve. Now as this nut is tightened up onto those threads.
How do you replace a shut off valve without turning off the water?
Quote from the video:
Quote from Youtube video: Clean cutter and just slip want to be sharkbite son. With the water and shut up. And shop back all the remaining water around the perimeter. And you're good to go.
Where is the outside water shut-off valve?
Finding the Water Shut-off Valve
- Look for a rectangular or round cover that will be near the edge of your property, often between the curb and the sidewalk. Some water main valves are located along an alley, rather than the street. …
- Open the cover to the meter to find the water shut-off valve.
What does a main water valve look like?
Quote from the video:
Quote from Youtube video: In warmer climates the shut-off valve is likely just outside the house and near an outside faucet in newer homes you'll find a valve that looks like this to turn off the water.
Where is my Rainbird valve?
Quote from the video:
Quote from Youtube video: On. As you walk the yard sweep the receiver wand back and forth until you hear beeps from the external speaker. The closer you get to the bow the louder and faster the beeping becomes.
How do you get a barrel lock off a water meter?
Quote from the video:
Quote from Youtube video: So once you get to drywall screw. Inside of it you get the threads started. And you don't need to pull it all the way out you just pull it about a quarter of the way out and the ball bearings.
How do you open a water meter hatch?
Quote from the video:
Quote from Youtube video: This stop tap is located underneath the square plastic lid. And to turn the water supply off here it's a quarter of a turn anti-clockwise.
How do you use a water meter lid key?
Quote from the video:
Quote from Youtube video: And that's how you open your water valve from the main in reverse if you stick it in and turn the other way that's how you close it i know with a lot of issues that are going on lately with texas.
How do you change a plastic shut-off valve?
Quote from the video:
Quote from Youtube video: Here we're going to be removing. The floor type valves first thing you want to do obviously is make sure you water shut off turn off your main valve.
How do you remove a shut-off valve?
Quote from the video:
Quote from Youtube video: Itself either by unscrewing. It or by loosening the compression nut at its base. The types of valves you'll see vary other pipes may not be threaded.
How do you remove a PEX shut-off valve?
Quote from the video:
Quote from Youtube video: And your shutoff valve is already sitting close to the floor. So you need to grab the pipe. And try to pull it up okay and see if there's slack in underneath the floor.
How do you release PEX?
Quote from the video:
Quote from Youtube video: So I just turned on my torch. Here put the pegs over it like marshmallow. I'm trying not to burn it but it doesn't really matter the brass fitting is not gonna get curved by this.
How do you remove PEX plastic fittings?
Quote from the video:
Quote from Youtube video: Gently work the tubing back and forth while slightly pulling away from the fitting until they separate. When making a new fitting connection always ensure that the system is deep pressurized.
