Here are a few of the ways you can deal with a toilet backing up:

  1. Use a Plunger to Clear a Clog. …
  2. Use a Toilet Auger to Clear a Clog. …
  3. What Causes a Blocked Sewer Line? …
  4. Pressure Release. …
  5. Chemical Treatment. …
  6. Mechanical Drain Cleaning. …
  7. Camera Inspections. …
  8. Plumbing Resources.

What causes water to back up in toilet?

Common reasons your toilets to keep backing up are: There’s not enough water in the tank. There’s a clog in the drain line. The main line for the house is clogged.

How do you unclog a toilet that’s backing up into the shower?

Push the drain snake into the curving pipe below, spinning clockwise on the way in and counterclockwise on the way out. If you’re successful, you’ll find the clog itself and the snake will draw it up as you spin it out. Clear the air: Occasionally, a blocked vent pipe will cause toilet water to back up into the shower.

Why does my toilet clog every time I poop?

Hard water is water that is full of minerals like calcium. Over time the minerals get deposited inside the toilet and especially inside the drain pipe. If your toilet is really old and it’s consistently a poor flusher, this may be the issue.

What is the best liquid to unclog toilet?

These are the best drain cleaners, according to testing:

  • Best Overall Drain Cleaner: Drano Max Gel Liquid Clog Remover.
  • Best Drain Cleaner for Hair Clogs: Liquid Plumr Clog Destroyer + Hair Clog Eliminator.
  • Best Single-Use Drain Cleaner: Green Gobbler Drain Opening Pacs.
  • Best Enzymatic Drain Cleaner: Bio Clean.

Can I use Drano in toilet?

Drano® Clog Removers can unclog a drain fast. They contain ingredients chemicals that quickly dissolve hair, soap scum and gunk. You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets.

Will Drano unclog sewer line?

Bust a Sewer Clog With Enzyme-Based Drain Cleaner

It’s hardly ever a good idea to put Drano or a similar product in the toilet because it contains sodium hydroxide, which generates heat and can damage the pipes.

What can I pour down my main drain to unclog?

Baking soda, Vinegar, and Water Pressure

Combine baking soda with vinegar at a ratio of 1:4 and mix the mixture in 60 gallons of water. As you pour the water down the drain, use the plunger/drain snake. The pressure of water will easily dislodge any debris from the main sewer line.

Can a clogged toilet backing up into tub?

After you flush your toilet, your waste travels through your pipes into the main sewer line. If water from the toilet begins backing up into your shower or tub, it’s because something is blocking the main sewer line. The waste has no choice but to find the closest drain to escape, in this case, your shower.

Will bleach unclog a toilet?

Bleach Can Break Down Clogs And Help Unclog Your Toilet

It’s not as effective for drain cleaning as professional drain cleaner, but it may work for smaller clogs in a pinch. To try this for yourself, pour about 2-3 cups of bleach into the toilet bowl, and allow it to sink into the drain pipe.

Will toilet unclog itself?

A clogged toilet will typically unclog itself over time. Most things that clog a toilet are water-soluble which means they will eventually dissolve in the toilet water. When the clog is given enough time to break down, the pressure of a flush should be enough to clear the pipes.

What product can I use to unclog a toilet?

To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing.

How do you unclog a toilet if the plunger doesn’t work?

Pour the baking soda into your toilet bowl. Then add the vinegar a little bit at a time to avoid overflow. The mixture should start fizzing and bubbling immediately. Let the baking soda and vinegar combo work its magic for twenty minutes.

Why won’t my toilet unclog with a plunger?

You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered. Use a gentle plunge initially since a hard one will force air back around the seal, blowing water all over you and your bathroom floor.