The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs.
How do I reset the F21 code on my washing machine?
To reset your washer, you simply need to press “Pause/Cancel” to cancel the current wash cycle. If your washer still has water in the tub, press “Drain/Spin.” This will make your washer go into a secondary drain cycle to empty the water. You can then attempt to run your washer again and see if the error code is gone.
What does F 21 on Kenmore washer mean?
a Long Drain error
@gwenr Error F21 is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset.
How do you restart the F21?
Simply press-and-hold the power/standby and volume down buttons for 10 seconds. You should feel a little buzz and your phone will reboot, without the need to select any software buttons (which wouldn’t be possible due to a crash).
How do I clear the error code on my Kenmore washer?
Unplug it for five minutes to allow a reset. The DU code indicates that the door is unlocked. The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating.
What is F20 code on Kenmore washer?
@dilligaff F20 means that you have a water fill problem on the washer. ” If the washer is not filling when the F20 appears: Check to see if you have Flood Safe devices on the inlet water hoses to your washer. If you do, these devices could be causing your problem.
How do you unlock a Kenmore washing machine?
How to Manually Unlock a Kenmore Front Load Washing Machine
- Touch “Control Lock” for five seconds until “CL” disappears from the washer’s display to unlock the control panel.
- Press “Start/Pause” to manually pause the cleaning cycle. …
- Pull the door’s handle to open the door and add or remove the clothing from the washer.
What does F mean on Kenmore washer?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly.
Is there a reset button on a Kenmore washer?
To reset your Kenmore washer and, since Kenmore washers do not have a reset button, go ahead and turn the washer off. Disconnect the washer from its power source. Then, wait for about three to five minutes. Now reconnect the washing machine to the power source and turn it on again.
What is Code OE on Kenmore washer?
@ronhurley the error code “OE” is a “Drain error ” and it is initiated by your washer not having fully drained in 10 minutes. Most common cause is a clogged filter. Check your “coin trap” filter for retained objects, like missing socks etc.:-) To clean it. 1.
Where is the drain pump on a Kenmore washer?
The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn’t have an access panel, as some do, you’ll have to take the entire front panel off.
Where is the coin trap on a Kenmore washing machine?
Your particular model washer does not have a filter, it has a coin trap attached and located behind the drain pump. To gain access to the coin trap remove the lower toe panel by removing the screws along the bottom of the toe panel. Be sure all the water has been removed from the tub before removing the sump.
Where is the drain pump filter on a Kenmore front load washer?
Quote from the video:
Quote from Youtube video: Next remove the screws from the bottom of the top panel. Pull the bottom away from the washer slide the panel down and set it aside.
Is there a filter on a Kenmore top load washing machine?
Your washer’s lint filter may be within the center agitator of a top-loading washer. Remove the cover and check for a lint trap that can be cleaned. A removable lint screen may also be located along the washer drum’s top rim.
Do Kenmore front load washers have a filter?
If your washer is having trouble draining, the drain filter may need some attention. Cleaning the drain hose and filter regularly will prevent blockages and odors from souring your laundry day.
Does a Kenmore washing machine have a filter?
Quote from the video:
Quote from Youtube video: And the filter is usually located on the bottom left-hand side of the washer. Itself right behind this door so first be sure to put down your paper towels then open up the access door.
How do you clean a Kenmore HE top load washer?
Quote from the video:
Quote from Youtube video: White vinegar. Between the bleach and the white vinegar it will clean away the bacteria. The soap scum the hard water deposits all that dirt and grime that builds.
How do you clean a top loading Kenmore washing machine?
Instructions
- Step 1: Wipe down the exterior. First, wipe down the exterior of the washer to remove dust and residue using a damp microfiber cloth. …
- Step 2: Clean the drum. When it comes to cleaning the drum of the washer, a washing machine cleaner tablet is the way to go. …
- Step 3: Clean the agitator.
