What is the Y terminal on a furnace?
Y – This is the terminal for cooling or air conditioning and goes to the compressor relay. Typically a thermostat wire pull is made to the air handler on split systems and then this wire is spliced for the separate wire pull which is made to the condenser.
Where do you connect the C wire on an old furnace?
Quote from the video:
Quote from Youtube video: The common terminal is going to be right here so if you're installing. Something you would stick the wire. Into this screw terminal from the bottom.
What does Y wire control?
Y or Y1. In most systems, the Y or Y1 wire controls your cooling system. If you have a heat pump, your Y or Y1 wire controls your compressor. Your compressor is responsible for heating and cooling your home.
What is the C terminal on the furnace board?
The c wire is an extra wire that can be used to provide a return path for continuous 24V power for any application. It’s normally used to provide a return path to power the thermostat. The “c” stands for common. It is often labeled as “c” on thermostat backplates.
Is Y wire the same as C wire?
Yes, you can swap out and reuse the Y wire as a C wire, since you don’t have an air conditioner. Or use the capped off wire (that’s probably better). hey’re just copper wires, and there’s no firm color code anyway.
Can I use Y wire as C wire for thermostat?
Correct. The C wire needs to go out to any separate equipment to complete the signalling circuit. One wire (like Y) provides the switched signal from the thermostat and the C wire provides the “return path” for the voltage.
How do you wire a C wire to a furnace?
Quote from the video:
Quote from Youtube video: One of these is gonna be Diggs wires they go to the thermostat. One of these is gonna be the wires that go to the AC compressor. And they come in through the top here.
What if there is no C wire for thermostat?
If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall. This is more likely to be true if you see all the other color wires present. Line voltage thermsotat scenario: you have just two wires (white and red, probably), and they’re thick.
Can I use the G wire for the C wire?
If there is no hidden C-wire, you can use a G-wire instead. However, you will not be able to use your fan independently when the heating or cooling isn’t running. Also, many HVAC systems are incompatible with this solution, including: HVAC systems using electric heat.
Where does C wire go on thermostat?
If your system has a C-wire, it might be in use or just tucked away behind your current thermostat. If your system doesn’t have a C-wire, you’ll need to run a new cable from your furnace to your thermostat to install most of the modern smart thermostat models.
What color is the C wire on a furnace?
Blue wires
Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
Is C wire hot or neutral?
The C wire is more like a neutral wire (in electrical terms) and it completes the electrical circuit between the furnace (or any heating system) and the thermostat, thus ensuring a flawless power supply to thermostat even when the furnace is OFF.
Can I connect three wires to the furnace C terminal?
If the terminals are allowed to have more than one wire, it will say so on the terminal block or in the manufacturer’s documentation. Two wires per terminal in HVAC work is common (though not usually correct), while 3 or more will tend to use a pigtail.
How do I know if I have C wire?
It is easy to see if you already have a c-wire connected to your system. Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter “c.” If this terminal has a wire attached to it, you have an active “c-wire.”
How do I know if my C wire is working?
Quote from the video:
Quote from Youtube video: Begin by putting one probe whichever probe you want on the rh wire and test every other wire with the other probe. One of the wires will show up is 24 volts and that is your c wire.
Should the C wire have voltage?
A C-wire, or a common wire, runs from your low voltage heating system (24v) and carries continuous power to your thermostat.
Is com 24V the same as C wire?
Thanks! Yes, it’s the same. “Common” or Com or C is a commonly used term for the neutral conductor in low voltage AC circuits.
Which wire is which thermostat?
Thermostat Wiring Tips
If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
What is the blue C wire on a thermostat?
The Blue or C Wire
C wires or varying colors apply to every thermostat, but blue C wires belong to thermostats attached to a heat pump. Blue wires are for heat pumps. This wire connects to terminal B on your thermostat.
Where does the C wire connect to a transformer?
Quote from the video:
Quote from Youtube video: Run actual thermostat wire in the all and connect. It to the existing thermostat wire if you've got an extra wire or if you want to fish some new ones in the wall. Not a big deal there.
