On the front panel of the control unit there is a small raindrop. While touching the raindrop (it doesn’t look like a button), push the program/enter button. It will cycle through the factory settings, such as capacity and hardness.
How do you change the hardness of a Rainsoft water softener?
Quote from the video:
Quote from Youtube video: And that puts you into the customer settings and there's the salt level you just adjust the salt level up or down press ENTER and you're done it's all set and ready to go so.
How do I adjust the hardness on my water softener?
Your water softener hardness setting should ideally be set to the amount of hardness in your water plus 4 for every ppm of dissolved iron in the water. For instance, if you have 1 PPM of iron, you must add 4 to the hardness number, and if you have 1.5 PPM of iron, you must add 6 to your hardness number, and so on.
What happens if I set my water softener hardness too high?
If the hardness is set too high, the softener will cost more to operate and waste water, costing you extra money. If your home has new copper plumbing, do not run the water softener for at least the first few weeks you use water at your house.
How do I know if my water softener is working properly?
How to tell if your water softener is working
- Check if your “softened” water is still easy to lather. …
- High-quality laundry work. …
- Clean pipes, faucets, toilet, tiles, and sinks. …
- You still experience the unique taste of soft water. …
- Leaks. …
- No regeneration cycles. …
- Low pressure. …
- Resin beads problems.
What should water hardness be set at?
0–3: If your hard water test strip indicates that your water is between 0–3 grains per gallon, your water doesn’t require softening. 3–7: Water between 3–7 gpg is moderately hard, causing spotty dishes and dry skin.
What is a good water hardness level?
120 to 170 mg/L
The membrane manufacturers will often specify what the maximum hardness concentration can be, but industry rule of thumb is that hardness should not exceed 120 to 170 mg/L (7 to 10 grains per gallon).
How do I determine the hardness of my water softener?
Use a High-Quality Hard Water Test Kit. A home water test kit is the simplest (and probably the best) way to check your water for hardness minerals. A regular kit usually includes water test strips and a color chart. You can purchase a test kit from a local home improvement store or a reputable online retailer.
How do I program my water softener?
Quote from the video:
Quote from Youtube video: There won't be a PM logo at the top there and to get the TV to go away you hit this cycle button and then to get into the program you're going to hold these two together. For about five seconds.
Is the higher the number the softer the water?
In short, the answer is No. The softener is designed to always produce water between 0-3 gpg (soft water). When setting your hardness number, you are telling the softener how many hardness minerals are in your raw city/well water.
How often should you set your water softener to regenerate?
Typically, the regeneration should occur after every 12 to 14 days or it should occur after a predetermined gallons of water that you use. You can set the number of gallons used before it regenerates through the water softener’s valve.
How do I know when my water softener will regenerate?
Quote from the video:
Quote from Youtube video: Than a metered water softener ideally if your water softener is sized and programmed correctly it'll regenerate about every three to five days but at least once every 14.
Why is my water still hard with a water softener?
If your water softener is operating but not softening your water, you most likely have one of the following issues: Water softener settings are off. Salt bridges or salt mushing. Too much water in the brine tank.
What do the numbers on my water softener mean?
One grain per gallon (gpg) is equivalent to 17.14 parts per million (ppm). Water hardness can be measured in gpg or ppm, but gpg is the most commonly used measurement. 20,000–80,000: This range signifies the grain capacity of most water softeners available on the market.
How do you read a water softener dial?
Quote from the video:
Quote from Youtube video: Show you the time of day. And here it's set to it's a 10:00 a.m. right now because that's the time. The morning it is and then on your right side you will have your gallon meter there.
What should my salt setting be on my water softener?
The level of water softener salt in a brine tank should be at least one quarter full, no more than 4-6 inches below the top of the tank, and a few inches above the water level.
Is 50 ppm hard water?
Soft water contains relatively few minerals and lathers easily. Hard water is rich in minerals such as calcium and magnesium, which is the cause of “scale” in kettles.
77 Water Hardness and pH.
| Type of Water | Hardness |
|---|---|
| Soft water | 10-50 ppm |
| Slightly hard water | 50-100 ppm |
| Hard water | 100-200 ppm |
| Very hard water | Over 200 ppm |
How do you read hard water test results?
For a quick reference, this water hardness scale used by Health Canada, breaks down results in mg/L and ppm as follows:
- Less than 60 mg/L is considered soft.
- Between 60 and 120 mg/L is considered medium hard.
- Between 120 and 180 mg/L is considered hard.
- More than 180 mg/L is considered very hard.
What is acceptable water hardness ppm?
The hardness of water is determined by the milligrams of calcium carbonateper litre and is reported it in parts-per-million (ppm). In general, water with less than 60 ppm can be considered soft, water with 60-120 ppm moderately hard, and water with greater than 120 ppm hard.
