4 feet is a good height. Don’t put it to low.
Where do you put an ice maker outlet box?
Quote from the video:
Quote from Youtube video: This is typically 18 inches from the floor to the top of the outlet.
How do you install a ice maker connector?
Quote from the video:
Quote from Youtube video: So I don't need much to start off I'll first show you how to tap into the cold water line using the sharkbite push fitting. Then I'll remove it and solder on a tee with a valve.
How do you rough a refrigerator water line?
Quote from the video:
Quote from Youtube video: It's going to put this little pointer. Right through your pipe. Now. They say don't you don't even have to turn the water off as a precaution I always turn the water off right there's no point.
Can you install ice maker box upside down?
Yes, any of the ice maker or specialty boxes can be converted to a Top Mount application by turning the box upside down – in fact, they can be installed at any angle.
How do you install a refrigerator water box?
Quote from the video:
Quote from Youtube video: An ice maker outlet. Box some pvc tubing and a multi-purpose pipe cutter. Step one is to shut off the main water line to your house drain the remaining water from the lines by turning on a faucet.
How do you install an ice maker drain?
Quote from the video:
Quote from Youtube video: Use the provided screw clamp to secure. If your appliance does have a remote drain pump attach the drain hose to the pump strain port and secure it with the clamp. Reinstall the access panel.
How do I connect the water line to my PVC ice maker?
Quote from the video:
Quote from Youtube video: So you put you insert this sleeve into the line first off you've got a compression nut. Our compression sleeve and then a compression nut.
How do I connect the water line to my PEX ice maker?
Quote from the video:
Quote from Youtube video: It's made so it'll slide on to half-inch copper or on to pecs the plastic PEX lines. Either way so it'll work on either one of them and this particular valve is made by push and connect.
Can I use plastic tubing for ice maker?
Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.
What is a recessed ice maker box?
One-piece recessed box design provides quick quarter-turn shut-off to water supply for a refrigerator ice maker or water dispensing appliance. Mounting tabs allow box to be mounted to left or right of stud bay and do not require additional support framing, providing a solid installation.
Can a hammer arrestor be installed upside down?
Can hammer arrestors be installed upside down? Yes. Oatey hammer arrestors are gas filled chambers which absorb shock no matter what angle they are installed.
What is a pull stop box?
LSP™ Products Group is excited to introduce the new Pull Stop Box™. This innovative product is half the size of an Icemaker Outlet Box, eliminates the need for a stub out, has an escutcheon to conceal the valve and has a push-pull knob to control the water flow to the supply line. Save Money.
How do you install an ice maker outlet in an existing wall?
Quote from the video:
Quote from Youtube video: Or CPVC bring it on through the wall. And the the barb on the pulse top allows you to crimp right to the valve the valve lardy installed.
How do you run a refrigerator water line through the wall?
Quote from the video:
Quote from Youtube video: You just want to bend it out a little bit to get it straight you can poke it through the installation. And then through there the whole long the other side should be enough.
Can you have an ice maker without a water line?
How To Install Ice Maker Outlet Boxes | SharkBite ·
How do I connect the water line to my PEX ice maker?
Quote from the video:
Quote from Youtube video: It's made so it'll slide on to half-inch copper or on to pecs the plastic PEX lines. Either way so it'll work on either one of them and this particular valve is made by push and connect.
How do you change a water valve on a refrigerator?
Quote from the video:
Quote from Youtube video: Box so with these boxes they're installed prior to drywall. And so they have little flaps that are drilled or nailed into the studs. So i loosen that up with just hitting with a hammer and a pry bar.
Where is ice maker water valve?
Locate your icemaker’s water inlet valve, it is typically located behind a refrigerator. Gently pull your refrigerator away from the wall.
How do you test an ice maker water valve?
Quote from the video:
Quote from Youtube video: Use a probe to touch one terminal of the coil you're testing and the second probe to touch the other terminal if the meter reading shows a result between 500. And 1500 ohms of resistance.
Where is the ice maker shut-off valve?
While the location of the water shut-off valve varies from fridge model to fridge model, and home to home, there are a few specific places you are likely to find it: Hidden in a box or metal guard at the water source. Located near the cold water supply at the bottom of the kitchen sink. In the basement.
How do you close an ice maker water line?
Quote from the video:
Quote from Youtube video: So usually that's that's um meaning that the water is flowing through there so to turn it off you just have to twist it perpendicular to the direction of the line.
Should you turn off your ice maker?
Turn off your freezer’s ice maker before leaving for your vacation. Unfortunately, if you leave it running, it can cause the part to malfunction, which may require a call to your local refrigerator appliance repair company.
