You can run the 3/8″ pvc tubing from the pump all the way to anywhere on your property where you can conveniently get rid of the water. A run of 150 feet is no problem, provided that no point in the tubing run is more than sixteen feet higher than the pump.
How far can you run a condensate pump?
The distance the water needs to travel horizontally once the lift is achieved is referred to as the “Run”. The “run” does not effect the lift or flow rate of the pump unless it exceeds 50 feet. “Runs” of 50′ or more will decrease pump output by about 10%.
How long should a condensate pump run?
A condensate pump may be a relatively simple device, but a faulty switch or undersized unit can lead to problems wherever it’s installed. Even the best condensate pump typically only lasts 3-5 years, so we highly recommend performing routine checks and giving these pumps a thorough cleaning several times each year.
How far can a condensate pump push?
Lift is how high a condensate pump can pump. Most pumps are rated at either 15 or 20 feet of lift.
How much water can a condensate pump handle?
Condensate pumps for residential applications can move up to 70 gal./hr. at low lifts, and about 15 gal./hr. at lifts of 13 to 14 ft.
How far can a condensate pump push water horizontally?
You can run the 3/8″ pvc tubing from the pump all the way to anywhere on your property where you can conveniently get rid of the water. A run of 150 feet is no problem, provided that no point in the tubing run is more than sixteen feet higher than the pump.
Should condensate pump run all the time?
If a condensate pump runs all the time, it can burn out the motor, and may even cause water damage to your home.
How often does a condensation pump run?
It is essential that the condensate pump system is regularly checked for correct operation. The frequency will depend on the environment in which the unit is operating but should be a minimum of once every 3 months.
How much energy does a condensate pump use?
approximately 60W
However, there are many instances when the air conditioning systems require to use of this pump to get the water out to prevent the water from dripping into the space. The condensate pump that is used in residential system is usually low power(approximately 60W) and simple in function.
Why does my condensate pump keep filling up?
Over time, algae and debris can build up inside of the condensate pump, forming clogs throughout the device – especially on the valve. Cleaning the valve is relatively simple. All you have to do is remove the drain line from the valve, remove the valve, clean it, and reinstall it.
How do you run a condensate pump drain line?
Quote from the video:
Quote from Youtube video: Here's the barbed fitting you'll slide right on top of this I will use a hose clamp okay as we when we get done with this I would like to put a hose clamp here. And a hose clamp on the other end.
Why does my condensate pump keep turning on and off?
All condensate pumps have a float, which is located at the top of the pump. This small piece can sometimes become stuck and cause the pump to shut off. If the float is stuck, simply tap on it until it can move freely again. If you notice the float is cracked or damaged, you will need to replace it.
