How long does concrete take to set in a post hole? We would advise waiting at least four hours before any weight or pressure is applied to the posts or fence holes. For best results, you should wait at least 24 hours before you continue hole and fence construction.
How long does concrete need to cure for a post?
Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.
How long does concrete post Mix take to set?
How long does Post Mix take to set? The main advantage of using Post Mix Concrete is its setting time. The concrete will begin to set within minutes of adding water, and will be firm in between 10 and 20 minutes.
How long should concrete cure before putting weight on it?
Although concrete will harden soon after pouring, it’s still susceptible to damage from weight during the first four weeks. Wait at least 24 hours before allowing foot traffic, including pets, on a newly poured sidewalk or slab, and don’t drive a vehicle on a new driveway for at least 10 days.
Is 2 feet deep enough for fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you add concrete to an existing post?
Quote from Youtube video: You cut the posts off at the level where the concrete's going to be and you have your contractor. Put in cleats in the concrete.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
Can you put dry concrete in a post hole?
Quote from the video:
Quote from Youtube video: Because there is no mixing you simply pour it into the hole. Dry. Then add water when digging your post hole it is important that the diameter of the hole be three times the width of the post.
How deep should a 7 foot fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How many bags of concrete do you need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
What size post should I use for a 6 foot fence?
Post lengths for fences start at 8 or 10 feet for a 6-foot-tall fence. They are commonly four-by-fours, which measure approximately 3 1/2 by 3 1/2 inches, or six-by-sixes, at around 5 1/2 by 5 1/2 inches.
Can new concrete be poured over old concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
Can you pour concrete in layers?
You can pour a new layer of concrete over an existing concrete surface. You may want to update or enlarge a surface, or to repair minor issues like surface cracks, chips, nicks, or discoloration. Adding a new layer over old can save time, money, and resources.
Can you pour concrete over concrete to level?
You can level an existing concrete floor with a leveling layer of new concrete, but you must prepare the old concrete floor first. Neglecting to prepare the old surface will prevent the new concrete from adhering correctly, resulting in a weak bond between the two layers.
What is the minimum thickness for concrete?
The thickness of concrete floor slabs supported directly on the ground shall be not less than 31/2 inches (89 mm).
Can I pour concrete over dirt?
Long story short, yes you can pour concrete over dirt.
How thick can self-leveling concrete be?
How Thick Can You Pour Self Leveling Concrete? The thickness depends on the product you use. But standard thicknesses are between ⅛ inch and 1 inch. However, there are mixes that can be poured as thin as 1/16 inch and as thick as 5 inches.
Why did my self-leveling concrete crack?
A DIY self-levelling cement job might look good for a few months, maybe even a couple years. But if it’s not done properly, eventually it can start to crack. If your floors move or bounce, that cement can crack, too.
Do you need to prime concrete before self-levelling?
Self-leveling underlayments require the use of a primer prior to installation (like the TEC Multipurpose Primer). Failure to use product recommended primer may result in installation failure. Primer retains the moisture within the self-leveling underlayment to allow proper curing.
