How do you install white oak hardwood flooring?
Quote from the video:
Quote from Youtube video: Now one of the most important things about the flooring is to bring it to the same moisture level as the floor is going to be on particularly.
How do you install 5 hardwood floors?
Quote from the video:
Quote from Youtube video: Run the flooring along the length of the room with an expansion gap at the perimeter solid hardwood expands. And contracts stagger the joints at least six inches. And also avoid H joints.
Which way should oak flooring be laid?
The most common way to lay hardwood flooring is by aligning the planks parallel to the longest wall. Apart from a few exceptions like sagging joists, this is the preferred direction to lay wood floors because it aesthetically provides the best result.
Should 5 hardwood be glued?
We recommend and encourage a glue assist for all nailed down floors, especially if you are nailing down a thin floor, a solid or engineered floor that is 5” or wider, or one installed in an environment with moisture swings. These types of floors are more likely to have problems with squeaks.
What is the recommended underlayment for hardwood flooring?
What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.
Is white oak a good hardwood floor?
Durable Flooring
The Janka hardness scale is a measure of durability for wood species. White oak receives a Janka hardness score of 1360, which makes it harder than red oak, white ash, American cherry and American walnut. This means that it will withstand daily use well, without a lot of denting or dinging.
How do you layout a hardwood floor?
Quote from the video:
Quote from Youtube video: Start with a whole plank from the point you marked on the wall. Put spaces between your plank and the wall. This will give the floor room to expand.
How do you stagger hardwood floors?
The basic rule to remember for creating a strong stagger is that all planks should overlap by 6 inches or more. This means that the short joint between planks should be at least 6 inches away from the nearest joint in any adjacent row. This type of stagger will lock the flooring tightly together.
How do you properly rack hardwood floors?
Quote from the video:
Quote from Youtube video: It's not so important as you get out in the middle of the floor to have very straight boards you can have bent and curled boards and believe me you'll get them.
Is it better to glue or nail hardwood flooring?
If you have a concrete subfloor, then you should glue your hardwood down, if you have a wooden subfloor then you can choose either method of installation. However, if you are planning on fitting your hardwood floor to joists, then you will need to secret nail them into place.
Are staples or cleats better for hardwood floors?
Most experts agree that cleats allow for greater movement in areas with high humidity, meaning your hardwood flooring will look better longer. Cleats are around the same price as flooring staples but have less availability.
Should you glue tongue and groove flooring?
Don’t Glue Tongue and Grooves
This is because wood flooring needs room to move as it expands. If the wood is glued both to the subfloor and between the planks, there’s no room for movement.
Do you need a vapor barrier under hardwood floors?
Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.
Do you need to put paper under hardwood?
Felt paper is installed under hardwood flooring to provide an extra layer of moisture protection and also to dampen sound. You will need to install it under your wood floors if a padding is not already attached to the hardwood planks. Many models of hardwood planks have dampening foam already attached.
Do you staple underlayment for hardwood floors?
There is no fastening the underlayment to the subfloor. However, during installation some installers like to fasten underlayment to the subfloor to prevent the underlayment from moving. If your choose this route, staples are a good choice to fasten the underlayment.
Is it better to glue or float hardwood floors?
If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry. If you are installing hardwood flooring then using glue may give you a more stable result.
How far apart do you nail underlayment?
For example, ¼-inch underlayment calls for 3d ring-shank nails every 3 inches along the edge and every 6 inches within the field of the underlayment. When nailing underlayment, don’t think that longer nails are better.
What do you put between subfloor and underlayment?
Quote from the video:
Quote from Youtube video: I prefer to do 3/4 inch plywood because it adds strength.
Should you nail or screw down subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.
Should you put a vapor barrier between subfloor and underlayment?
Therefore, because concrete is porous, it’s a good idea to install a vapor barrier over your concrete subfloor before installing your flooring. This way you can stop the vapor drive of water upward to your floors, protecting them from any damage (source).
