Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.

What’s the best way to level above ground pool?

Quote from the video:
Quote from Youtube video: Again you want to keep an eye on your level. And if you find a time one end or low on an end adjust. It accordingly and you're doing all your adjusting from the outer end of the 2×4.

What should I put under my above ground pool to level?





Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.

Can you put an above ground pool on uneven ground?

Less than an inch of unevenness is acceptable, but anything beyond that can lead to the leveling problem. Such a pool won’t last for long, and you would need to bring it down and get it reinstalled by a professional. Leveling the surface first before assembling the pool is important.

How unlevel can an above ground pool be?

Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.

What is the easiest way to level ground for a pool?

  1. STEP 1: Determine your location and remove any large rocks or debris. …
  2. STEP 2: Place 2x4s on the site and place a level on top. …
  3. STEP 3: Add or take away soil until the ground is level. …
  4. STEP 4: Repeat the process until the entire area is flat. …
  5. STEP 5: Rake any remaining rocks or debris and tamp the ground.
  6. How do I level my above ground pool without digging?

    Quote from the video:
    Quote from Youtube video: You could also use a flat shovel to help you do this. But you keep pulling all around the circle there and eventually you'll have a nice level spot for your above-ground pool.

    Should I put pavers under pool legs?





    Yes you DO want pavers under your legs. That will keep them from sinking. The pavers need to be level with the ground so they do not poke your liner.

    Can you level a pool with blocks?

    Leveling the Pool’s Bottom Track



    We would just level the earth and lay the track down and roll out the wall. The result was some of those pools were pretty “off level”. Today every pool installer uses some kind of blocks for leveling the track and we place a block under every one of the bottom track connectors.

    Should I put sand under my pool?

    Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.

    What will happen if my pool is not level?

    The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.

    Should I put sand under my Intex pool?



    The folks at Intex are fairly clear that you should NOT put sand under your pool. The sand can easily wash away, causing voids under your pool and risking your pool leaning and even collapsing.

    How do you level the ground for an Intex pool?

    Use a line level to measure at 12-36 points around the pool. Then use flat shovels or a sod cutter machine to remove turf and lower the high spots. Add a one inch layer of sand. The Wrong Way: Eyeball the approximate area of the pool, and raise visible low spots by adding sand without actually checking for true level.

    How do you level a sloped yard for an above ground pool?

    Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.

    What do I put under my above ground pool for grass?



    Here’s a list of the most popular materials to put underneath an above ground pool, whether it’s on grass, pavers, gravel or concrete.

    1. Interlocking Foam Tiles.
    2. Carpet.
    3. Intex Ground Cloth.
    4. Flooring underlayment.
    5. Carpet padding.
    6. Sand.


    What kind of foam goes under a pool?

    Styrofoam sheeting

    Styrofoam sheeting is often used as the bottom base below the liner of an aboveground pool. The foam provides a smooth surface for the liner and protects it from sharp rocks that may puncture it.

    How many inches of sand do you need for a pool?



    two to three-inch

    The general rule is that there should be a two to three-inch base of sand under an above ground pool. If you know the dimensions of your pool area, then you can easily figure out how much sand you’ll need for the base using a sand calculator.

    Can you put topsoil under a pool?

    Well-known member. Yes, everything you read will tell you to dig down as soil built up can settle and throw your pool out of level. That being said people do it. My pool installer who is highly recommended by the pool store and does tons of installs does it.

    How do I level my yard for easy set pool?

    7 Easy Steps to Level the Ground for Your Easy Set Pool

    1. Step 1: Select the location. …
    2. Step 2: Prepare the Ground. …
    3. Step 3: Drill the 2×4 Arm and Pin It to the Ground. …
    4. Step 4: Place the Bubble Level on the Arm, Spin and Check It. …
    5. Step 5: Adjust the Ground According to the Level. …
    6. Step 6: Water and Tamp Down the Ground.

    How do you level ground by hand?

    1. Outline your plot with stakes and string to create a boundary for the cultivation. Hammer stakes into the ground at each corner of the area to be cultivated. …
    2. Dig up the soil. Start at one corner of your plot and insert the shovel about halfway into the soil. …
    3. Hoe the area. …
    4. Rake the area to further level the ground.