How do you remove cement board and tile?

Quote from the video:
Quote from Youtube video: First off we're going to use a hammer. And a chisel and then we also have this other chisel that's a little bit wider.

How do I remove bathroom backer board?





Quote from the video:
Quote from Youtube video: And bend them and flex even possibly cause a leak. So now I've removed all the screws I'm just putting the back board put backer board away from the wall.

How do you remove Backerboard and tile?

Hold a reciprocating saw at a 90-degree angle along the removed grout line. Start near the center of the wall or floor. Saw slowly just until you break through the cement backer board. Lower the saw, with the blade still in the cement backer board, so that it is almost touching the floor or wall.

Can you reuse backer board after removing tile?

Undamaged cement backer board does not need to be replaced. If tile has not been attached directly to the backer board, and it has not been dented or punctured, it can be reused without any special preparation.

How do you remove glued down cement board?

Quote from the video:
Quote from Youtube video: You just find it nailed down which is easy enough to get a shingle ripper a roofing you know tear off shovel down between this between the plywood. And the backer and pop them up.

How do you pull up a Backerboard?





Quote from the video:
Quote from Youtube video: And you chip it away little pieces at a time you know and I was getting little chunks but here's after about two hours into this I found out that if you take your pry bar. And just go up a little bit.

How do you remove tile without damaging cement board?

How to Remove Tile From Hardie Board

  1. Position a cold chisel on the grout between one the tiles. …
  2. Place a point punch in the middle of the tile. …
  3. Position the cold chisel along the edge of the one of the tiles next to the tile you removed. …
  4. Remove the tiles from the board and discard.


How do you remove Thinset from backer board?

Quote from the video:
Quote from Youtube video: You can hold this thing at a good angle and hammer it in okay like that now this is a thinner blade. But these are hammer you can hammer it and it'll shoot it up.

How do you remove tile and cement board from wood subfloor?



Quote from the video:
Quote from Youtube video: And I'm gonna show you how I would do it there's some different ways to do it you can rent an expensive jackhammer to cut the tiles out I'm just using a regular hammer drill that you get it Louis or

Can you tile over old cement board in a shower?

There is no need to install backer board on a concrete substrate—ceramic tile can be applied right over concrete, provided the surface is flat, smooth, and free of significant cracks.

Can you tile over used backer board?

Preperation. If the boards appear to be in good shape and firmly adhered to the floor, you can re-use the old backer boards for your new tile installation. However, you still need to prepare the boards for installation, taking them back down to the bare cement board.

How do you remove fiber cement board?



Quote from the video:
Quote from Youtube video: Find all the other nails pop em out and then at some point the board's gonna get really loose and you're just gonna be able to pull it right off the wall. Be careful they're heavy.

How do you remove tile and subfloor?

Quote from the video:
Quote from Youtube video: It can be a bear to remove. My first plan of attack to remove a floor like this this is a pry bar and a heavy hammer. To make an attempt to separate the underlayment from the subfloor.

What tool removes thinset?

An angle grinder is one of the best thinset and tile removal tools around. If you happen to have an angle grinder on hand you have used before for concrete grinding, try pairing it up with the stiffest metal brush attachment you can find.

Does wetting thinset make it easier to remove?

Chipping Thinset Away with a Putty Knife. Pour 0.39 gallons (1.5 L) of boiling water gently over the thinset. Within 40 to 60 minutes of water application, you should notice cracks starting to appear in your thinset. This decreases its integrity and makes it much easier to remove using a putty knife.

Does vinegar remove thinset?



Vinegar acts as a simple acid solution when it comes in contact with certain elements, such as cement. While vinegar is a weak acid solvent and won’t damage dried concrete, it wukk help to loosen up the bonding elements of thinset cement, allowing you to wipe up limited dried residue with your sponge.

What is the easiest way to remove thinset?

Quote from the video:
Quote from Youtube video: So you have a couple options we have floor scrapers. Um these are great you can put the whole body weight on them the blade on these is not going to be a sharp come on down let's say a handheld one.

How do you remove old thinset from shower walls?

Quote from the video:
Quote from Youtube video: Gonna take your putty knife. And just scrape it. Off.

Can I tile over old thinset?

Tile needs a smooth, level surface to be installed on. You can put new thinset on top of old, but only if the old thinset is perfectly smooth and level. This is rarely the case once the old tiles have been removed. The best option to smooth out the old thinset and prepare it for new tiles is to grind it down.