My answer:

  1. Remove drywall until you can go to studs – almost no extra work and much faster and long-term than floating. If you can’t do this then add an extra stud – it does not need to go higher than hole. …
  2. Build an access box (2x2s) and attach across framing.
  3. Drywall access box and hole.
  4. Be glad you did it right.

How do you support a patch of drywall?

Quote from the video:
Quote from Youtube video: You also want to make sure that you countersink your screws in a little bit that way when you put mud over the top it's going to cover up those holes you want to take your piece of drywall.

How do you install a large drywall patch?

Quote from the video:
Quote from Youtube video: You'll have a rough edge around your cut the sand and wipe it down if there aren't studs behind your hole attach a 1 by 4 inside your wall and screw your drywall patch to that.

How big of a drywall hole can I patch?

6 inches across

Big holes in drywall (aka anything larger than 6 inches across) are a little bit harder to fix than your usual little holes. They’re too big for a patch like we used before, so you’ll actually need to buy a panel of drywall and patch your hole with that.

How do you patch a large round hole in drywall?

Quote from the video:
Quote from Youtube video: It doesn't have to be perfect then you can flip your piece. Over. And take this piece right here. And hit it and if you cut it from the backside.

Can drywall patch hold weight?

Toggle Bolts Can Hold the Weight on Drywall

Plastic can hold about 20 pounds, while the metal holds up to 100 pounds such as a drawer or a floating shelve. They are also great to use on the ceiling, but only up to 15 pounds.

Can you put a screw in a drywall patch?

If you attempt to insert a screw, anchor, or bolt into spackle, the fastener will pull out of your wall. Patch damaged drywall with a new piece of drywall (as shown below) to make a durable repair.

How big is too big for spackle?

Use spackle to repair holes less than 4 inches (10 cm) in diameter. Spackle can be used to repair holes up to the size of your hand. You will have to use a support like mesh or wire to repair holes larger than 4 inches (10 cm) in diameter.

What is a drywall clip?

Drywall clips, which can also be referred to as drywall fasteners or stops, are used in both residential and commercial construction. These clips are placed on the edge of the drywall and fastened to grip the stud. They provide a surface for the drywall to be supported when installed.

How do you fix drywall without studs?

Quote from the video:
Quote from Youtube video: Situation. First thing you're gonna need is a 1×4 furring strip and a saw to cut the furn strip with cut the furring strip four inches longer than the overall length of the hole.

How do you fix a big hole in a wall without drywall?

Quote from the video:
Quote from Youtube video: So if you got a hole like this and you don't have a piece of drywall you can do it a couple different ways you can pressure fit it or you can just put a nail on the side.

How do you spackle a large hole?

Quote from the video:
Quote from Youtube video: The thing with mesh tape. If I just set that on there. And I start putting spackle on it's just gonna push through all of the holes. And then you'll have to let it dry.

How do you butterfly patch drywall?

Quote from the video:
Quote from Youtube video: So essentially what you're going to do is take your patch that has mud on it and slip it in the hole because of the mud. Around the edges of the patch.

How much weight can drywall hold without an anchor?

How much weight can drywall hold without anchors? This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time.

How do you hang something heavy on drywall without studs?

Quote from the video:
Quote from Youtube video: This into the drywall. And it's as simple as drilling. It in when that anchor splits. Your screw is already to hang a picture on. Next we're gonna get to a series of toggle bolts.

How much weight can drywall hold with a screw?

A regular nail or screw in drywall is only going to hold up to 10 pounds. Drywall can flake and break apart, which is why it is recommended to hang items using an anchor. Hollow or drywall anchors are the best way to make sure your wall and object do not get damaged if you are hanging something without a stud.

Do I really need drywall anchors?

Because drywall is too weak to hang things from, a drywall anchor is necessary,” explains Matt Michaels, a spokesman for Lowe’s Home Improvement in Charlotte, NC. The anchor essentially allows you to insert screws into the wall without causing the soft drywall to crumble around it.

How do you hang a 100 pound mirror on drywall?

Quote from the video:
Quote from Youtube video: Push it through the wall. And when you push it through the wall the spring opens up look at that all right you pull back on it and you tighten it with a screwdriver.

How much weight can drywall anchors support?

Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.

Can you hammer in drywall anchors?

The Plastic Screw-In Kind: This is the easiest type of drywall anchor. Like the others, it’s hammered into the wall, but it simply grips the wall with it’s giant threads. To set it: Hammer it in to get it started, then screw the anchor directly into the wall with a screwdriver.

Are wood screws stronger than drywall screws?

Drywall screws are hardened so that the Phillips slots won’t strip out under the stress from high-speed screw guns. Wood screws are thicker and made of softer metal, making them more snap-resistant. Different thread patterns make the screws work slightly differently too.