https://youtu.be/eRKjoOkl_Q4

How do you adjust a bathtub drain stop?

Clean the rod assembly and stopper and replace, checking to see that the stopper is placed firmly against the flange. To adjust the rod assembly, move the nut that lengthens or shortens it. Lengthening will raise the stopper higher, while shortening lowers it. Run water into the tub to test for tightness.

How does standing waste tub drain work?





As water fills the tub, it also rises unseen inside the large drain tube to the same level. The overflow hole is slightly below the rim of the tub. When water reaches the overflow hole, it runs down the center of the hollow stopper tube and down the drain.

How do you use a lift and turn tub stopper?

A lift-and-turn stopper is closed by turning the knob on the top of the stopper until it goes down, and it is opened by lifting and turning the knob in the opposite direction.

How do you adjust a trip lever drain stopper?

Quote from the video:
Quote from Youtube video: So here's how it works.

Should bathtub lever be up or down?

When the lever is up, the stopper is held in place, keeping your tub filled with water. When the lever is moved down, the stopper lifts and the tub drains. Trip levers are often connected with plunger-style stoppers that sit further down your drain and are invisible from inside the tub.

Why does my tub not hold water?





The bathtub doesn’t hold water because it’s clogged.



As the clog builds up, the water pressure changes. Water is then forced to look for alternate routes of escape. Even when there is a bathtub drain stopper in place, water might not stay in the tub for long, at least not long enough to allow one to finish bathing.

What is the drain on the side of the tub?

The overflow drain on a bathtub prevents a bathroom flood by passively draining water once it reaches a certain level in the tub. The overflow drain pipe connects to the main tub drain pipe to dispose of the extra water.

What is a standing waste?

A type of device for the control of the outlet and overflow of a plumbing fixture; an overflow pipe is inserted in the outlet at the bottom of a fixture or tank, permitting water to be retained at a desired level.

What is a tower drain?

Rather than the turn & lift, or plug & chain styles of the standard waste/overflow line, this drain comes with a “pull knob” handle on the top which allows you to easily drain the water from the tub without reaching down into the water and getting your hand wet.

Does a tub come with a drain?



Generally, bathtubs are sold without drains and faucets but include pre-cut holes for both. Fortunately, most standard bathtubs have the same size drains, which are 1.5 inches wide.

Does my tub need an overflow drain?

Depending on the style of bathtub and its use, having an overflow drain is not always necessary. If your bathtub is a shower/bathtub combo or if your bathtub is a smaller model, then having an overflow drain isn’t necessary. Installing an overflow drain is also a bit more involved than installing a standard drain.

Do you need a tub overflow?

The only reason bath tubs come with an overflow is because of insurance purposes. So the answer is, no you don’t have to have an overflow in your bath. However, it is recommended to have an overflow if you have kids and a lot of carpets in the house.