How do you build a deck next to a concrete patio?
Quote from the video:
Quote from Youtube video: We used to have that table that's hitting in the middle of the yard. Dogs fear always muddy we can't wash them so we've actually already moved this BBQ pit out once but then it rained.
Can you build a deck on concrete slab?
An existing concrete patio will make your deck installation much easier and faster, and you can install your deck directly onto the concrete. You will want to account for water drainage and material expansion/contraction, so it is best to place boards called ‘sleepers’ underneath the deck.
How do you attach decking to a concrete slab?
Quote from the video:
Quote from Youtube video: With the joist positions marked out on the slab lay out the joist. And start drilling the holes. This first step is just basically to get a mark on. The concrete now find yourself some tape.
How do you build a deck over existing concrete?
Quote from the video:
Quote from Youtube video: But in order to keep these from getting too high we're going to have to notch our joists. Around these concrete steps to do that we're going to use a technique called scribing.
Can deck posts sit on concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. The photo on the left shows a post set in a bracket that has been mounted to the top of a footer. The photo on the right shows a post that has concrete poured around it, which can lead to a crack like you see here.
How do you attach a ledger board to a concrete block?
Use a wood bit to drill ½” pilot holes through the ledger board. Next, use a concrete bit to drill into the concrete wall. Install two bolts at the end of each ledger board. Hammer the sleeve anchor through the ledger board into the concrete wall.
How do you attach wood to concrete?
You can fasten wood to concrete using 3 different methods, depending on your preference. Hammer-set concrete fasteners, concrete screws, and mortar nails are all effective ways to connect wood to concrete. Once you’ve determined the right method for your project, you can easily fasten wood and concrete objects!
How do you install floor joists on a concrete slab?
Quote from the video:
Quote from Youtube video: Into the sill plate. They do recommend to make any joints for the rim joist. Go in between the floor joists. But i found that if you carefully drive the nails equally on both sides of the i-joist.
What is a floating deck?
A floating deck is a deck that isn’t attached to a building and they “float” above the ground. Generally, floating decks are low to the ground and don’t require handrails or even staircases. They are sometimes called “grade-level” or “freestanding” decks because they’re built just above the ground level, or grade.
Can you build a deck over a concrete stoop?
A concrete stoop with steps can be a formidable obstacle when trying to build a deck. A massive concrete stoop will be difficult to remove. Most of the time you will need to break the concrete apart using a sledge hammer or jack hammer and haul the…
How do you build a deck on a concrete front porch?
How to Build a Deck Over a Concrete Porch
- First make sure your concrete porch is structurally sound. …
- Do not attach decking materials directly to the surface of your concrete porch. …
- Not all Decking is Created Equal. …
- Best Decking Material for Concrete Porches. …
- Hardwood Deck Tiles Can Be Installed Directly Over Concrete.
How do you build a deck on uneven concrete?
Lay the deck frame over the uneven concrete surface. If you’re applying the deck directly over a concrete surface, use the bricks and temporary support beams to lift any sagging portions of the frame. If you’re constructing a raised deck, adjust the frame’s height and evenness using temporary support beams.
How do you build a deck on an uneven surface?
To build a decking base on sloped uneven ground:
- Clear the area of all grass, weeds and debris using a good quality spade.
- Dig 1ft deep post holes.
- Set the posts using post mix so that the top is at or slightly above the desired height.
How do you build a deck without digging holes?
If you’re ready to start planning, there are two great options to build a deck without digging any holes: surface deck blocks and deck foot anchors. The cheapest foundations are deck blocks, which can be purchased for less than $12.00 a piece. Deck blocks sit on the ground, so proper planning is essential.
How do you build a ground-level deck on uneven ground?
Quote from the video:
Quote from Youtube video: Once i had the footings where i wanted them i spread gravel in their dirt holes to prevent shift with water build up then i used my 2×6 to recheck position.
How do you lay decking on a slight slope?
Quote from the video:
Quote from Youtube video: You should factor in a two-millimeter. Fall for every meter bear. In mind is full when checking the levels throughout the build. Put your spirit level on top of the frame.
Do ground level decks need footings?
If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
Can you lay decking on uneven ground?
You can install decking almost anywhere, as long as there is a suitable foundation. While they are easiest to install on level grounds, you can also build them on sloped or uneven terrain. With that said, you may need to take a few extra steps in ensuring the stability and quality of your composite decking.
How high should decking be off the ground?
30cm
Some UK structures will fall under ‘permitted development’ meaning that you may build or add decking or other external additions to them without planning permission providing the following criteria is met: The Decking structure height is no more than 30cm above the ground.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. Even though technically a ground level deck is elevated up to 24”, here we will discuss decks built less than 8” high.
