how to extend washing machine drainage hose such that it doesn’t leak
- buy the necessary length of clear plastic tubing.
- wrap the existing hose with electrical tape until it barely fits inside the plastic tubing.
- use a hose clamp to cinch down the tubing so that there are no leaks.
How do I increase the length of my washing machine drain hose?
Quote from Youtube video: Next install the extension hose with adapters between the original hose. And drain then tighten clamps reinstall drain hose with the extension.
Can you extend the washing machine discharge hose?
You can buy supply hoses in lengths up to 96 inches, which you can attach to your existing hoses with 3/4-inch hose thread connectors. Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.
How do you stop a washing machine drain hose from leaking?
Quote from the video:
Quote from Youtube video: Begin by removing the two screws on either side of the drain. Hose. Then push in on the hose. Working it up and down until the retaining clip is flushed to the back of the washer.
How long can a washing machine discharge hose be?
Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
Can you connect 2 washing machine hoses together?
Hooking up two washing machine hoses to create a longer hose connection requires a coupler available at appliance repair stores and gardening centers.
How do you extend a hose?
Quote from the video:
Quote from Youtube video: Apply plumbers tape to the end of the existing hose. And attach the water hose connector.
How do I extend my washing machine drain hose UK?
Quote from the video:
Quote from Youtube video: So one easy thing to do is to get one of these two-way connectors. You just pop it in there and get some more pipe which i've already got that's going to the spigot.
How do you clamp a washing machine drain hose?
Quote from the video:
Quote from Youtube video: So with our pair of pliers. We're just going to grasp onto the clamp. Pull like this then take the hose. Pull it out then pull out your clamp. Next grab your new OEM replacement clamp.
How do you extend a corrugated hose?
Quote from the video:
Quote from Youtube video: And basically you just line up the corrugated spot just squeeze it together then you're going to slide it inside and it will expand.
Does washing machine drain hose need elevated?
Yes, the drain hose needs to be elevated and it’s always best to do so at a level that’s higher than the washing machine itself. This will prevent possible siphoning. There are also other steps you can take to ensure that you get the best drainage.
What happens if washer drain is too low?
Placing your standpipe too low or too high can cause backflow and overflow. A standpipe that is too low is prone to overflowing from the standpipe itself, while a standpipe that is too high makes the washing machine have to work harder to pump drained water to the standpipe.
How far can a washing machine pump water?
The washing machine discharge maximum height is 96″ for top and front loading machines. However, installing the extended height above the washing machine could cause that extended height of water to drain back into washing machine.
What is the longest washing machine hose?
Length. Washing machine hoses vary in length from about 3 feet to 12 feet.
