If you really want to keep the PVC it can always be painted with a plastic paint such as Krylon Fusion. You could fill the holes in the drywall and sand it smooth to alleviate the need for a plate. You may want to maintain a 1/8” gap and fill with caulking to eliminate drywall mud cracking due to pipe movement.

How do you cover a drywall pipe?

You can pick up caulk from most hardware stores or online. Attach the wooden boards over your pipes so that they’re flush with the ground and ceiling. Push the frame up against the wall to cover the pipes completely; then use the caulk to attach the boards to the wall.

How do you hide exposed pipes on the wall?





Use Decorative Pipe Covers



You have wallpaper borders with lighthouses, paintings of beach scenes, an anchor on the wall, etc. You could wrap these exposed pipes with rope and it would look perfect.

How do you pass PVC through walls?

Quote from the video:
Quote from Youtube video: Hole. This is an sds drill from harbor freight. And the bit will move back and forth aggressively as it goes through the concrete.

How do you hide exposed ceiling pipes?

Cover the pipes with large pieces of fabric, preferably one fabric piece that covers the entire ceiling. Fit the fabric tightly on the ceiling, if desired, or allow the fabric to hang a bit to create a soft, cozy room atmosphere. Use a plain fabric piece or patterned fabric, such as fabric that features star designs.

What is an escutcheon plate?

An escutcheon is a type of plumbing supply typically made of metal that hides the unsightly hole in the wall that pipes usually come through. People can also refer to them as flanges or cover plates.

How do you make exposed pipes in chic?





Place vintage furniture, a colorful carpet and maybe, a few artifacts or decorative potted plants and your living area will look sensational. You can check this decor for inspiration, one of our favorite designs. Check out this great DIY project with rustic wood and exposed pipes!

How can I hide PVC pipe in my basement?

If you have several pipes together in one or more locations, you may be able to hide them with a box. If you are handy with a hammer and saw, frame a box around your pipes and then wrap it with paneling or drywall. Finish and trim as needed and stand back to admire your work.

What is a pipe sleeve?

Pipe sleeves are a metal covering that fit over your copper pipes that comes out of the floor and go into your radiator. They’re a fantastic way of supercharging your radiator valves and making them look even more stylish.

Can you bury plastic pipes in walls?

Remember the water regs you are NOT ALLOWED to bury potable water pipes in walls or concrete. They must be contained within another plastic pipe so that they can be replaced without having to dig them out!

Can you cement around PVC pipe?



Hydraulic cement expands as it cures, and will form a tightly packed structure around the PVC pipe. Install large structures — such as a patio — using a concrete thickness of no more than 6 inches if layering over PVC pipes.

Can you paint exposed pipes?

Priming and Painting



If you are painting pipes with 360-degree exposure, simply spray a single wet coat of primer on the metal and wait for it to dry, which should take about 10 minutes. When spraying is impractical, brush on a single coat of brushable metal primer with an appropriate paintbrush.

How do you make exposed ductwork look good?

If you don’t want to go through the hassle of covering up your exposed pipes and ducts, but you also don’t want them to draw too much attention, simply paint them the same color as the ceiling or walls that surround them. Painted in a unifying hue, they will blend in and become part of a cohesive background palette.

How do you frame around a pipe?



Quote from the video:
Quote from Youtube video: I was trying to come up with a couple different ways that I wanted to solve this with without losing space along the floor from the walls by building the wall completely outside of those pipes.

How do you frame around PVC pipe?

Quote from the video:
Quote from Youtube video: I made really quick and I think I showed this in a previous video. But I have two inches marked off from my XPS insulation. And then I have the distance from from the end for where the pipe will end.

How do you box pipes in a wall?

Quote from the video:
Quote from Youtube video: To cover it we used a cut down piece of plywood to the same width. And more drawing around pipes there's a lot of pipes here but leaving half an inch allowance.

How do you frame a pipe around a ceiling?

Quote from the video:
Quote from Youtube video: Same thing on all the other places. Start by kneeling the two by two to the ceiling after you get your straight line and then I'll rip plywood to the right length. And depth.

How do you make a bulkhead for drywall?



Quote from the video:
Quote from Youtube video: So we're going to just going to create one large bulkhead to cover them both up in one shot. I've gone ahead and started over here on this side already I basically got things finished up.

How do you hang drywall around pipes?

Quote from the video:
Quote from Youtube video: Work little cuts like these like the little diameter holes you're gonna test fit it if it doesn't fit make sure you cut along to make the adjustments. Same thing on the bottom piece.