How do you hang something heavy on a concrete ceiling?

Here are some ways you can hang objects from concrete ceilings without drilling:

  1. Use adhesive wall hooks for lightweight objects.
  2. Use a powder-actuated tool for angle clips and pins.
  3. Use hardwall hangers on concrete.
  4. Use tape only on smooth surfaces.

How do you bolt into a concrete ceiling?

Quote from the video:
Quote from Youtube video: I am going to secure this hook to a concrete ceiling in my storm shelter I'm going to use Techcon concrete anchors to secure it to the ceiling.

Can you drill into a concrete ceiling?

Set up the overhead drill press. Secure the drill into the press and then raise it until the bit almost touches the ceiling. Move the overhead press to line the drill bit up with your mark and then lock the wheels in place to prevent movement while drilling. Raise the drill again until the bit touches the ceiling.

How much weight can a concrete ceiling anchor hold?

The info sheet says 2,200 to 5,500 pounds, but again, I wouldn’t mount anything expensive or dangerous in them without a lot of stress testing. It would probably be worth bringing in a contractor to take a look and give you some kind of idea.

How much weight can I hang from a concrete ceiling?

There are so many factors that determine “how much weight can a concrete roof support” that it isn’t a black and white question. When completely healthy and showing no signs of wear and tear, a concrete roof can safely support around 1,200 pounds (0.54 t) per square foot.

How much weight can ceiling hooks hold?

In most cases though, for anything above 5 pounds, any hook that screws into a wall or ceiling stud is the recommended hook to use. For weights below 5 pounds, an adhesive hook will do the job. Adhesive hooks are also easily removable and won’t damage the surface they’re attached to when removed.

How do you install a ceiling hook without a drill?

Adhesive Utility Hooks

Adhesive hooks can also be used to hang plants from the ceiling without drilling. As long as the surface is smooth and clean, adhesive hooks hold up to about a pound. The good thing is that adhesive hooks can be positioned anywhere you want.

How do you attach something to concrete without drilling?

Cut Nail. Using cut nails is an easy approach for attaching wooden items to concrete without a hammer drill. The cut nail has a square, tapered shape with a tip pa. These are driven through a board into the concrete underneath, much like nailing wood to the wood floor.

How do you install concrete hooks?

If you do not want to purchase the tools, ask the store if they are available for rental.

  1. Hold the hook on the concrete block wall. …
  2. Drill a pilot hole through each mark, using a hammer drill with a masonry bit. …
  3. Unscrew the mounting screws from the sleeves. …
  4. Put the screw through the hook’s screw holes.

How much weight can a concrete screw hold?

These concrete anchor bolts, or bolt anchors for wood, are available in several sizes and will hold up to 200 lbs.

What is the best anchor for concrete?

For that reason, the best concrete screws are either stainless steel, galvanized, or zinc coated. Many are simply coated with a corrosion-resistant layer, which is usually blue. These materials do better in damp conditions and resist the moisture present in concrete surfaces.

How much weight can a 3/8 concrete anchor hold?

Technical Specifications for Drop-In Anchors

Size Minimum Embedment Pull-Out (lbs.)
1/4” 1” 939
3/8” 1-9/16” 1560
1/2” 2” 3105
5/8” 2-1/2” 3323

How much weight can plastic anchors hold in concrete?

Overall, plastic expansion anchors are the least strong of all the anchors discussed here, with actual pull-out strength of around 30 pounds in concrete but as little as 10 lbs in drywall (depending on the anchor and screw size). Unfortunately, many people use plastic anchors in drywall when they shouldn’t.

How deep should anchor bolts be in concrete?

The hole needs to be drilled 1/4″ deeper than the anchor will penetrate. The hole can’t be drilled while the fixture is in place due to the fact that the hole is larger than the diameter of the bolt being inserted into it.

How much weight can a 1/4 concrete anchor hold?

Technical Specifications for Tapcon Concrete Screws

Size Minimum Embedment Shear (lbs.)
3/16” 1” 400
1/4” 1” 620

Are Tapcon screws better than anchors?

Tapcon and wedge anchors are pre-installed mechanical anchors that attach structural objects to concrete structures. However, the wedge anchor suits heavier-duty applications, vs the Tapcon anchor that typically serve lighter deployments. Another difference between them is in their fastening method.

How much weight can a Tapcon concrete anchor hold?

1,360 lbs. *A safety factor of 4:1 or 25% of ultimate pullout/shear value is generally accepted as a safe working load.