How do you open a GE Hotpoint washing machine?
Quote from the video:
Quote from Youtube video: And you're basically just pushing inside very gently and then once you push that in you'll be able to pull this forward you'll hear him push end.
How do I open my Hotpoint top loader washing machine?
Quote from the video:
Quote from Youtube video: Top detach the wires from the control board and set the control panel aside. Now insert a putty knife under the main top to release the two spring clips securing the front panel.
How do you open the back of a Hotpoint washing machine?
Quote from the video:
Quote from Youtube video: Remove the panel. Now you have to throw place a towel in front of the filter to absorb the water. If you unscrew the filter gently. There's too much water's coming out you can screw it back up again.
How do you take the lid off a Hotpoint washing machine?
Quote from the video:
Quote from Youtube video: Safety first always disconnect an appliance before carrying out any work the next thing I need to do is to remove the top of the appliance by undoing the two screws at the. Back.
How do I unlock the lid on my GE washer?
To unlock the lid:
- Pausing the machine will allow you to open the lid.
- During the spin cycle, pausing the washer does unlock the lid but for safety reasons you must wait until the basket has completely coasted down to a stop before the lid unlocks.
How do you open a locked washing machine lid?
Quote from the video:
Quote from Youtube video: Most latches have a manual release that you can reach in and open the door with. You'll have to either remove the access panel. Or the top panel. Then reach in to pull the release.
How do you open a washing machine?
Quote from the video:
Quote from Youtube video: If the door is still stuck strike the area firmly where the catch is as this may help to release the lock.
How do you open the bottom of a washing machine?
Quote from the video:
Quote from Youtube video: Turn the filter counterclockwise slowly to control the amount of water being released remove the filter and allow the water to drain into the tray.
How do you remove the agitator on a GE top load washer?
Quote from the video:
Quote from Youtube video: To get this old agitator. Out i had to use my hands to feel around for the small nipple on the bottom of the agitator housing. And line it up with the larger hole to put the screwdriver.
What does key lock mean on Hotpoint washing machine?
When the display visualises “KEY LOCK ON” the control panel is locked (apart from the ON/OFF button). This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home.
Why is my washer locked and won’t open?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
Why is my washer stuck on lid lock?
– Lock striker that presses down on the lid switch may be out of alignment. – A piece of lint or washing machine detergent has built up over time and hinders the locking of the lid. – The control board sees an open lid switch when it attempts to lock.
How do you bypass a lid lock?
Quote from the video:
Quote from Youtube video: This switch. So that the washing machine thinks the lid is closed. So that you can simply drain the water out of your washing.
How do you reset a GE washer?
Motor Reset Procedure:
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. …
- The motor has now been reset and is ready for you to start a cycle.
How do I reset my Hotpoint washing machine?
Quote from the video:
Quote from Youtube video: The machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
Is there a reset button on GE washing machine?
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
