How do you remove a drain with a broken cross member?
Quote from the video:
Quote from Youtube video: And just create some resistance in the drain. Turn counterclockwise. And you'll get the drain. Out if your threads are you know messed up like these were this is how um the drain.
How do you remove a tub drain with a broken crosshair?
Quote from the video:
Quote from Youtube video: You can see here I've got my screwdriver to actually break open one side of the tub drain. This point I'm taking my hammer. And I'm hitting the screwdriver underneath the tub drain.
Why can’t I unscrew my bathtub drain?
Sometimes the post threads may be stripped, making it difficult to unscrew the stopper. Try gently pulling upward while turning. If your stopper does not have a visible screw set on the knob, but does not seem to unscrew, lift the stopper up and turn, looking for a small screw.
How do you remove a tub drain that is glued?
Quote from the video:
Quote from Youtube video: So what i did was i put my drain wrench back into the drain. And with my left hand i'm gonna use the my big plumber's wrench and with my right hand i'm using my socket wrench here my craftsman.
How do you remove tub drains with crossbars?
If your drain fitting has these crossbars, insert a drain wrench into the cross shape and turn counterclockwise to unscrew it. (There are two ends to the wrench; use the side that offers the best fit.) You can also try using a pair of needle-nose pliers to grip the X and unscrew the drain fitting.
What are the different types of bathtub drain stoppers?
The six most common types of bathtub drain stoppers are push-and-pull, pop-up, lift-and-turn, flip-it, toe-touch, and trip lever. It does not matter what type you have unless it must be fixed or replaced. The sole purpose of a bathtub stopper is to keep the water in the tub while you soak.
How do you remove a push pull drain stopper?
Push and Pull
- With the stopper in the open position, unscrew the knob from the stopper base.
- Push the stopper closed to reveal the center post.
- Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction.
- Lift the stopper from the drain.
Are all bathtub drain threads the same?
One of the most confusing and annoying plumbing problems is replacing the bathtub drain (called a plug) that screws into the base (called a shoe). There are two common thread types (16 and 11 1/2 Threads Per Inch), and one uncommon one (14 TPI).
Are shower drains glued?
The glue on shower drain can be used with plastic shower bases, fiberglass and steel. Be aware that when using a gluon fitting it can be more difficult to get the measurement of the pipe correct. So, be sure you measure very carefully and double check all the dry fit pieces before you begin gluing.
How does trip lever bathtub drain work?
With the trip lever down, the plunger is lifted and the drain is open; when the trip lever is up, the plunger is forced down and the drain is closed. And if the tub is accidentally overfilled, excess water can still run down the overflow tube behind the trip-lever plate and can drain away because the plunger is hollow.
How do you remove a lift and turn stopper without a screw?
Quote from the video:
Quote from Youtube video: But basically you'd grip it underneath that top part and just grip it tight turn it once he gets loose. Enough. Just keep turning. And it comes out.
How do you remove a trip lever drain?
Quote from the video:
Quote from Youtube video: So you really don't have to be that careful about what you're doing. It just comes out like I said it goes all the way down into the drain. So you just have to be careful about pulling this thing out.
How do you open an old bathtub drain?
Quote from the video:
Quote from Youtube video: Old tub drain this is the freest most likely and pretty easy way to get these annoying things out we need a hacksaw a chisel a hammer hair dryer step one we're gonna cut a little notch.
