How do you remove baseboards from hardwood floors?

Quote from the video:
Quote from Youtube video: Step three using a hammer tap the blade of a thin putty knife behind the molding. Starting with any quarter round trim installed in front of the baseboards. To start working it loose.

Do I need to remove baseboard to install hardwood floor?





A: It is not absolutely necessary to remove baseboards to install new hardwoods, but remember that wood floors require an expansion gap of 1/2 inch along the surrounding walls to accommodate expansion and contraction with changes in moisture and humidity.

How do you remove base trim without damage?

Quote from the video:
Quote from Youtube video: So that's why we use a drop a scrap of wood. And that disperses the pressure along this whole piece of um wood and i use a hammer. And i use both of them the hammer and the crowbar.

Should I remove baseboards before refinishing hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.

Do floor installers remove baseboards?

Most flooring applications do not require you to remove existing baseboards. However, you may choose to remove the baseboards and replace them at the same time as flooring installation if you want to switch to a different baseboard height or change the style to match the overall look of your remodel.

What tool do you use to remove baseboards?





Tools You’ll Need for Baseboard Removal:

  1. Hammer.
  2. Putty knife.
  3. Utility knife.
  4. Small pry bar.
  5. Pliers.
  6. Pencil.


Do flooring companies replace baseboards?

Many flooring companies install baseboards as well as flooring. Since flooring companies often have the same tools necessary for removing baseboards safely without damaging them as they do for putting down the flooring itself, they are usually a better bet for removing and replacing baseboards than the homeowners.

What goes down first flooring or baseboards?

Baseboards are often installed before flooring, although it depends on the type of flooring being used. It is necessary for carpeting to have the trim in place, allowing the edges to be tucked under and out of sight. However, for hardwood or laminate, it is easier to install the trim after.

Do baseboards need to be removed to replace carpet?



No, baseboards do not need to be removed. When installing baseboards before carpet, ask the installer how large of a gap to leave between the floor and the trim (e.g., ½”). The carpet installer can run the tack strip up to the trim, then roll excess carpet under the trim.

Can you stay in house while floors are refinished?

If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project …

Should I remove quarter round before refinishing floors?

If you’re refinishing your floors, you’ll want to remove the quarter round trim to sand or strip off the old finish all the way to the edges. If done correctly, you can even replace the same trim once the floors are done!

How much wood is removed when sanding hardwood floors?



about 1/16 inch

Floor sanding removes at most about 1/16 inch of wood, and damage that is deeper than that usually will still be evident, though less obvious.

Is it cheaper to refinish or replace hardwood floors?

Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).

How many times can you re sand hardwood floors?

Since normal sanding will remove from 1/64 to 1/32 of the wood surface, the surface can be sanded from 6 to 10 times or more, before the floor needs to be replaced entirely. If the floor is resurfaced every 10 to 20 years, the floor will last for a century or more.

How often should hardwood floors be sanded?



Depending on a floor’s thickness and the experience of the flooring professional, a floor can be sanded around 4-6 times in its entire life. Hardwood floors can be refinished every 7-10 years, making the 4-6 refinishes more than enough.

What is the best time of year to refinish hardwood floors?

If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it’s often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.

How long does a hardwood floor last?

On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.

Is it worth it to refinish hardwood floors?

It takes some elbow grease to refinish hardwood floors, but it’s worth it. Hardwood floors add value to your home and provide a classic look that goes with any style.

What is the cheapest way to refinish hardwood floors?



Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.

Does refinishing hardwood floors increase home value?

5. Flooring – Replacing outdated carpet or flooring, or simply refinishing wood floors that have seen better days, will definitely increase the value of your home, with a 102% return on investment.