How do you remove a plumbing shut off valve?
Quote from the video:
Quote from Youtube video: I loosen. This nut here that's the compression. Nut. Now it's loose enough just to do it by. Hand. Guess what it will just slip off watch. This that's it that is all there is to it.
How do you change a water shut off valve under the sink?
Quote from the video:
Quote from Youtube video: You can expect to drop while tackling the project this one is pretty simple easy step one is to remove any junk in the area of the valve that you're going to be working on get it all out of the way.
How do you change a shut off valve on a plastic pipe?
How to Replace Plastic Plumbing Shutoff Valves
- Shut Off the Main Water Valve. Turn off the main water valve to the house. …
- Cut the Plastic Pipes. …
- Apply the PVC Primer. …
- Primer and Cement. …
- Unscrew the Ring-nut. …
- Primer, Cement and Push. …
- Align and Tighten. …
- Shut off the PVC Ball Valve.
How do you replace a plastic shut off valve under the sink?
Quote from the video:
Quote from Youtube video: Here we're going to be removing. The floor type valves first thing you want to do obviously is make sure you water shut off turn off your main valve.
How do I remove a push to connect valve?
Quote from the video:
Quote from Youtube video: Just use a wrench. This is a 3/4 inch line 13/16 wrench just push it on here this is really chewed up but it'll go on the other end too just going to give it a good push on.
How do you remove a push fit valve?
Quote from the video:
Quote from Youtube video: You you see that little you see that little flexible bit you just pulling that in and then they come off so you take your fitting. Just and then you pull it in and that's it just pull it off.
How do you replace a kitchen sink shut-off valve?
Quote from the video:
Quote from Youtube video: Hi makers builders and do-it-yourselfers Harley here today we're gonna remove this old shutoff valve that doesn't work anymore and replace it with a bright shiny new one to do this should require just
What are the 3 valves under kitchen sink?
You may find 2 shut off valves (one each, for hot and cold water) or a three-stop valve for both water supply lines. The 3-way shutoff valve can also be shared between the kitchen sink hot water and the dishwasher. Under your kitchen sink, you should find a shutoff valve for the supply lines.
How do you remove a shut-off valve compression sleeve?
Quote from the video:
Quote from Youtube video: We'll need to remove the compressed ferrule ring for this to work. And this is where this little gadget comes into play this tool which is essentially a puller attaches to the nut.
How do you remove a plastic faucet connector?
Quote from the video:
Quote from Youtube video: And the easiest thing to do really and truly is just take these blue tabs squeeze them like so and then just pull this side.
How do you remove a PEX shut off valve?
Quote from the video:
Quote from Youtube video: And your shutoff valve is already sitting close to the floor. So you need to grab the pipe. And try to pull it up okay and see if there's slack in underneath the floor.
How do you remove push fittings without tools?
Quote from the video:
Quote from Youtube video: Use an adjustable wrench.
How do you remove Quick Connect plumbing?
Quote from the video:
Quote from Youtube video: We press in both the hose and the collar. We hold the collar and pull to remove the hose. If we need to reinstall this hose. We want to cut past where our notches are from where the collar.
How do you release a quick connect water fitting?
Quote from the video:
Quote from Youtube video: And it's very simple to install. You just put the water line in until it hits bottom. And then you tug on it and it's locked in. And if you'll see there's a little separate. Part here that as long as
How do you remove a Moen Hydrolock connector?
To disconnect a Duralock fitting, grasp the hoses on both sides of the fitting and push them together while you depress the black button on the fitting. When the button is fully depressed, it unlocks the connection so you can pull the hoses apart.
How do I remove a Delta quick connect water line?
Center & Right image: Pinch together at the ridged, square tabs on the sides of the fitting. It may help to push up on the fitting if the tabs are not compressing. Do not pull the tabs out as that may lock the hose to the tube. Pull down gently to remove the quick connect hose.
How do I disconnect a Moen quick connect fitting?
Removal: Squeeze the white tabs (B) together and push the tabs in. This will cause the white tabs (B) to push back into the quick connect releasing the white button.
How do you remove the water line from a Moen faucet?
Quote from the video:
Quote from Youtube video: Unclamp this weight by releasing the tab with your thumb. This will release the weight from the hose. Next travel up the hose until you find a quick disconnect.
