How do you replace fascia board yourself?

Quote from the video:
Quote from Youtube video: Tool basically vibrating head and has a blade on it that cuts wood and nails. And just really made short effort into cutting the board and getting nice straight lines.

Can I replace fascia myself?

Luckily, replacing a fascia board is as easy as taking out the old board and fitting a new one in its place. Once you’ve installed a new board, all you need to do is seal the seams and paint it to match your home. With a short afternoon renovation, you can have new fascia boards that will last for years!

What is the best material for fascia boards?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Can you put new fascia over old fascia?

You can buy all new plastics and cover over your old fascia. However, you will need good solid fixings behind it so it may depend on how good the timber is behind the old fascia. Hope that helps. Yes over capping is possible is the original timber Fascias are in good condition.

Can you replace fascia board without removing gutters?

There is no way to replace the fascia board without removing the gutters, as the gutters are mounted to the board. So, your roofers will carefully remove the gutters. Typically, the same gutters can be re-installed on the new fascia board, if they are in good condition.

How do you remove rotted fascia boards?

Quote from the video:
Quote from Youtube video: That just loosen the gutter. So we can get the fascia board out a small flat pry bar is the perfect tool for this job one of the nice things about rotting wood is it just lets. Go so easily.

What type of wood is used for house fascia?

Cedar is a popular fascia wood and redwood is another. That’s because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.

How thick should fascia boards be?


Fascia is the term given to the horizontal board that is fixed along the rafter ends at the eaves, closing the gap between each rafter. Traditionally made of 3/4″ or 1″ thick timber, PVC has in recent years become the material of choice for most contractors and developers due to its maintenance-free appeal.

What’s the difference between soffit and fascia?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

Should fascia boards be capped?

Capping over is a cheaper roofline repair option as the methods used are less substantial. It should only be considered if the existing timber fascia is in very good condition and free from rot. Attaching a PVC fascia board to rotten timber may cost you more in the long run!

How long do wooden fascias last?

While they tend to last for years, fascia and soffits do need replacing, so every homeowner eventually needs to recognise the signs of wear and tear.

How do you replace UPVC fascia boards?

How to Replace Fascia and Soffits Boards With Plastic Upvc

  1. Step 1) Fully Remove the Boards. Existing boards and guttering – (see more in the photo gallery) …
  2. Step 2) Fixing the Soffits. …
  3. Step 3) Fixing the Fascias. …
  4. Step 4) Eaves Vents and Gutter Support Brackets. …
  5. Step 5) Guttering. …
  6. Step 6) Eaves Felt.

Do you need scaffolding to replace fascia?

Do I Need Scaffolding To Replace Fascias and Soffits? In some instances, scaffolding will be recommended – such as for a typical 3 bedroom semi-detached house on two floors, replacing soffits and fascia board will require the erection of scaffolding.

How do you attach a PVC fascia board?

Quote from the video:
Quote from Youtube video: So the rabbets along the back sides of my rakes and fascias i cut with a simple half inch router bit using an edge guide on the router to just reference off that edge and create the groove.

Can you replace soffit and fascia yourself?

If your soffit and fascia boards need replacing, it’s vital to get it done as soon as possible. Don’t worry, replacing soffit and fascia boards is actually rather simple, and can be done by anyone with rudimentary DIY knowledge and experience.

What goes on first soffit or fascia?

The job goes smoother when you follow the correct installation sequence. First nail up the J-channel, then soffit panels, then fascia, then drip edge.

How do I replace soffit board myself?

Soffit and Fascia Repair

  1. Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. …
  2. Remove Rotted Fascia. Remove the rotted section of fascia. …
  3. Remove Old Soffit. Pull down to remove the old soffit. …
  4. Remove Rotted Rafter. …
  5. Attach Cleat. …
  6. Attach New Rafter. …
  7. Seal Replacement Soffit. …
  8. Attach Replacement Soffit.

How long does it take to replace fascia and soffit?

Labor. The labor cost to install fascia is between $6 and $20 per linear foot. The average one-story home will need 300 linear feet of soffits, which would require between 11 and 13 active labor hours, costing $800 to $1,400 total. The labor cost to install soffits is between $1.50 and $3 per foot.

How much does it cost to put fascia in a house?

Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.

Cost to Replace Soffit and Fascia

  1. Wood averages $1-$3 per linear foot.
  2. Vinyl averages $5-$8 per linear foot.
  3. Aluminum averages $8-$20 per linear foot.

Can you put new soffit over old?

If you happen to be working on an older home, most contractors and homeowners find that they will need to install their vinyl soffit over top of old wood. This can definitely be done, but you will need to take several precautions to prevent the wood from rotting beneath this new layer.