How do you remove a sink strainer without a lock nut?
Usually there are 4 plastic arms that hold the retainer in the middle of the plastic cone. Use a cutting drill bit on your drill to get in there and cut the plastic away. Once you cut away these pieces, the drain will come out, just pull up on it. you’ll then need to go to a hardware store and get a complete drain.
How do you remove a kitchen sink drain basket?
Quote from the video:
Quote from Youtube video: It's called plumber's putty just take a little bit out of the container. Then rub my palms back and forth like this to form this long shape. We'll then place the putty on the lip of the new basket.
How do you remove a plastic basket strainer from a sink?
Quote from the video:
Quote from Youtube video: Place down a towel and a pail under the p-trap to catch any water this setup has two trap adapters. And one union p-trap to loosen off to be able to remove. The.
How do you replace a sink basket assembly?
Quote from the video:
Quote from Youtube video: Once you tighten down that nut you're going to force out the excess plumber's putty and then you just have to wipe this excess. Off and that plumber's putty is our gasket underneath the sink basket.
How do you replace a kitchen sink basket strainer?
Instructions
- Remove the Sink Strainer. Start by removing the pipes that are connected to the old sink strainer. …
- Prepare the Drain and Sink Strainer. Clean the area around the sink opening before installing the new strainer. …
- Apply Plumber’s Putty. …
- Secure the New Sink Strainer. …
- Reinstall the Drain Pipes.
Do kitchen sink drains unscrew?
Quote from the video:
Quote from Youtube video: It is completely loose insert long nose pliers into the sink strainer to keep it from turning while loosening the nut remove the rubber gasket from the underside of the drain.
Can I use silicone sealant instead of plumbers putty?
You can use silicone caulk or plumber’s putty to seal sink drains. Plumber’s putty may crack and cause leaks as the clay dries out with time. But it’s the preferred choice of sealant if you’ll be adjusting or removing the drain.
How do I remove a sink drain nut?
Cut the nut off with a hacksaw. Cut diagonally through the soft metal or the plastic of the locknut. Pull it off once the edge has been breached. Alternatively, if you are not going to use the drain basket again, place the hacksaw blade between the locknut and the sink proper and saw through the drain basket.
Do I need plumbers putty for kitchen sink drain?
If you need to stop or prevent leaks around your faucet, sink or tub drains − plumber’s putty is the product you need. Plumber’s putty is a sealing staple for professionals, homeowners and DIY-ers alike.
Are kitchen sink drains universal?
Yes, kitchen sink drains today are universal. They’re generally 3 ½ inches in diameter and are larger than bathroom drains, which are 1 ¼ inch in diameter. Kitchen sink drains are the same size as most standard-sized shower drains.
How do you replace a sink stopper?
Quote from the video:
Quote from Youtube video: Use the channel lock pliers to unscrew the nut at the bottom of the drain. Now remove the rubber. Gasket. Now pull out the drain. Clean any excess plumber's putty from the sink hole.
How do you use a sink strainer?
Quote from the video:
Quote from Youtube video: All you got to do is with this particular kind is twist it until the plunger can actually insert further down so it's got a setting for draining. And a setting for plugging.
What is a kitchen sink flange?
The flange in a kitchen sink is the visible portion of the drain system that connects the sink to the plumbing. It can become scratched or discolored, and the metallic finishes can sometimes begin to peel off the base metal.
How do you plug a kitchen sink without a stopper?
Place the cloth or sponge inside a plastic sandwich bag. Squeeze as much air out as you can and zip it closed or use a rubber band to secure it. Stuff the bag into the drain. The material should expand to snugly fill the hole, and the plastic bag will prevent water from escaping down the drain.
How do you use a kitchen strainer?
We’re not actually meant to put the strainer in the kitchen sink before pouring. What we should really be doing is taking the strainer, placing it directly into the pot and then pouring the water out into the sink. Less waste and less chance of burning ourselves!
Is colander same as strainer?
We commonly refer to both colanders and sieves as “strainers,” although technically we use a colander to drain (discarding liquids like pasta water) and a sieve to strain (saving liquids like broth for stock).
What can I use as a strainer?
If you don’t have a strainer, there are a few ways to strain the water from your pot without losing any food.
- Tongs.
- Slotted Spoon.
- Lid.
- Cheesecloth.
- Coffee Filters.
- Bandana.
- Pantyhose.
- Fine Mesh Bag.
What is the proper use of colander?
A colander (or cullender) is a kitchen utensil used to strain foods such as pasta or to rinse vegetables. The perforated nature of the colander allows liquid to drain through while retaining the solids inside. It is sometimes also called a pasta strainer or kitchen sieve.
Can colander use steamer basket?
If you don’t steam food frequently—‚or if you find yourself in need of a steaming basket, stat—don’t run out and buy one. All you need is a metal colander or a baking rack, a big pot, and some aluminum foil, and you’ve got everything you need to make a steamer at home.
What can be used as substitute of colander?
Use a spoon (the largest one you have) for small pasta, beans, and blanched vegetables only. Scoop what you want, then cradle the edge of the spoon against the pot and tilt slightly to drain. It takes a while, but it works.
