How do you Rethread a bathtub drain?
Quote from the video:
Quote from Youtube video: And some tools that you should be using the proper tools to use when doing this and the tools that you should be avoiding. So that you don't either damage the tool or damage your drain.
What is a tub drain shoe?
The tub drain shoe is an elbow that channels water down the drain pipe, it is the first fitting attached to the bottom of the tub’s drain basket. In order to remove and replace the shoe you need to access beneath the bathtub.
How do I replace my bathtub flange?
Quote from the video:
Quote from Youtube video: Here let me put it back in tighten it up a little bit you could always take a screwdriver lift it up and take a screwdriver and take that screw out to remove the drain plug.
Are bathtub drains threaded?
Tools You’ll Need To Remove The Bathtub Drain
The exterior part of the flange is usually threaded. The threads are threaded into the drain’s tailpiece. When removing the flange, you’ll simply unscrew it gently from the drain’s tailpiece.
How do you fix a push down bathtub plug?
Quote from the video:
Quote from Youtube video: Are different sizes make sure you take it with you to match it up get yourself a new one reinstall that use your screwdriver to tighten it into place reinstall the top cap.
How do you fix a bathtub drain that won’t stay open?
Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage.
Do you need plumbers putty on a tub drain?
For the drain itself, plumber’s putty is the best solution. The material makes waterproof seals with wet surfaces. If you need to seal the drainpipe, you’ll want to use silicone. Caulk is important to sealing pipes because it creates watertight seals that don’t wash away.
Are all bathtub drain threads the same?
One of the most confusing and annoying plumbing problems is replacing the bathtub drain (called a plug) that screws into the base (called a shoe). There are two common thread types (16 and 11 1/2 Threads Per Inch), and one uncommon one (14 TPI).
How do you install tub shoes?
Quote from the video:
Quote from Youtube video: When you're installing your new tub shoe. Just make sure that it sits evenly you don't want it to be crooked you don't want to mess up the threadings.
Are all tub drains screwed in?
There are several different styles of tub drain — two of the most common are threaded and drop-in drains. Threaded drains are usually found in older tubs, while the drop-in version is common in newer models. Determining whether you have one or the other involves a bit of inspection.
Can I use silicone on tub drain?
In case you find it challenging to reach the underside area of the tub drainage pipe, then your best option will be silicone caulking. Use the caulk to seal the exposed drain area. Silicone caulking forms a strong, tight seal that doesn’t wash away easily.
How do you snake a bathtub drain?
Quote from the video:
Quote from Youtube video: And now turn the drum and push steadily down push good you're going in going in okay now loosen the thumb screw. And then draw back so you get another four or five inches of wire exposed.
Can’t get snake past trap tub?
So, why won’t your drain snake go down the bathtub drain? The answer may be that you are either using the wrong kind of drain snake, or you are trying to force it through a P-trap, or you are forcing the snake cable through the pipe too quickly or the clog is just too darn big.
How do you snake a bathtub drain with a hanger?
Quote from the video:
Quote from Youtube video: Stuff it down in there and then just start twisting. And when you twist you're basically kind of you know like twisting carrier kind of gathering it all together.
Can you use a snake to unclog a tub drain?
Sometimes this problem can’t be avoided, however. Luckily, it’s not difficult to snake a tub drain. To clear a clogged bathtub drain, you’ll need a plumbing snake, some work gloves and some basic cleaning supplies. Unscrew the overflow plate, which is the plate under the faucet and above the drain in the tub.
Can you use plunger on bathtub?
You can easily unclog your bathtub drain with a standard cup-style plunger, but you have to seal the overflow drain first. Tubs essentially have two drains: There’s the familiar one at the bottom of the tub that you close to fill up the tub with water.
How do you recoil a drain snake?
To recoil a drain snake, you insert the new cable through the hole in the back and guide the wire around the outer perimeter of the auger’s drum. Once you establish a foundation around the edge of the container, you will retract the wire back into the machine as normal.
Can you use a toilet auger in a bathtub?
They’re specifically designed to handle tough clogs in plumbing. You should only use a drain snake if an auger just isn’t an option. But if you’ve got a sink or bathtub clog, put the auger away.
How do you snake a shower drain without a snake?
Use a natural drain cleaner.
Mix together 1 cup of vinegar (distilled white vinegar works best) and 1 cup of baking soda. First, pour boiling water down the drain to loosen; then follow with the baking soda-vinegar mixture and wait 15 minutes. Rinse with more boiling water.
How do you snake a manual drain?
Quote from the video:
Quote from Youtube video: Pull back now after you get through the first or second turn you won't actually have to put your hand on the cable in order to pull back on it there'll be enough friction in the line to do that.
