How do I stop my ceiling vents from falling down?

Quote from the video:
Quote from Youtube video: So you might need a drill drill. And a drill bit because the actual diameter here might be a little bit bigger you need to get it large enough hole to be able to put them in okay.

How do you secure a ceiling register?





Drill a hole on either side of the register. Mark the holes on the ceiling with a pencil, drill and install a drywall anchor in each location. Secure the register with screws into the anchor. Some people paint the ceiling and the register so it blends in better (and covers the screw heads).

How do I get my ceiling vents to stay up?

Ceiling Vent Covers Without Screws



Drill very small holes on each side of the vent about 2 1/2 inches from each end, away from the slots. Use high-carbon steel piano wire because it maintains its shape. You should then thread the two cut wire pieces through the holes, gluing the end on the other side with hot glue.

How do you fix a loose vent register?

Quote from the video:
Quote from Youtube video: And see what kind of stock I got all right so I found this piece of pre-stained prefinished trim that I had laying around and it's gonna work good this is about 3/8 of an inch thick.

How do you secure a vent cover?

If you want to secure a wood vent cover to the floor, you can nail it to the floor or use wood glue. Metal register covers can be screwed down If you have carpet in place, you can still screw (or hammer down) the register cover — you just need to drill through the carpet and pad first.

How do you install a heat register on a drop ceiling?





Cut through the tracing on the ceiling tile with a utility knife, using the level as a straight edge. Lift the tile up into the grid. Center the opening underneath the duct’s opening and lower the tile into place. Place the heat register’s opening through the hole in the ceiling tile and into the duct’s opening.

How do you install a ceiling without screws?

Quote from the video:
Quote from Youtube video: So here's the better way to do it. Put a couple of little Springs on it. Here. Nice and springy all you do is you tuck the one side in talk to the other side. In voila it stays in your ceiling.