Epoxy an appropriately sized metal sleeve to one pole, putting 1/2 the sleeve on the pole. Drill a hole through (both walls of) the other end of that pole, then epoxy a small steel bar into the hole. Drill a hole through one end of the other pole and epoxy a small steel bar into it.
How do you repair a fiberglass pole?
Quote from Youtube video: So we'll just cut the knot. Off move the elastic. Until we get to our broken pole. Here this fiberglass shock cord is split in half years ago i put epoxy on it and this tape. And it worked for years.
How do you hook up a fiberglass rod?
Joining / Connecting Fiberglass Sections
- One method is to cut a slot in the end of the larger of the two tubes using a hacksaw. …
- A second method is to glue the tubes together. …
- The third method is by use of a couple of stainless machine screws which go through both tubes.
How do you join two pieces of fiberglass?
Quote from the video:
Quote from Youtube video: You can just sort of stitch it together with like you can duct tape it and if it's a bit floppy then just stitch it together wait for that to go off and then glass the whole thing.
How do you bond fiberglass to fiberglass?
What is the best adhesive to bond fiberglass?
- Cyanoacrylate – also known as instant adhesives, super glue, crazy glue, ca glue, etc. …
- Two component epoxies – Permabond two part epoxies cure at room temperature and provide strong bonds to fiberglass.
How do you fix a broken tent pole?
Quote from the video:
Quote from Youtube video: Completely unclip it and then slide the hub off the shock. Wave the tent pull out flat. And slide your sleeve over the damaged. Area. If you have duct tape firmly rabbet each side of the sleeve.
How do you cut fiberglass by hand?
Quote from the video:
Quote from Youtube video: The dips will do the work or else the fiberglass may free an ordinary hacksaw can be used as well as a handsaw. Deeper clean and coat the fiberglass.
How do you cut fiberglass columns?
Quote from the video:
Quote from Youtube video: So if you for example have a nine-foot column and you really need an eight and a half then. You just cut a half a foot off the bottom of the column.
