The only way to turn off the override function is to turn the switch off and wait for 30 seconds to 1 minute before you turn it on again. This should reset the sensor so that it works on motion detection again.

How do you get a motion sensor light to turn off?

The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.

How do you fix a sensor light that won’t turn off?





Motion sensor lights are often easy to reset from your breaker panel.

  1. Turn off the circuit breaker that controls your motion sensor lights. Leave it off for one minute before flipping it on again.
  2. Check your motion sensor lights. For some models, resetting the breaker is all that is needed.


Why does sensor light stay on?

What Causes my Light to Stay On? Several things can cause your motion detector to stay on, including age, storm damage, a power surge, improper installation, and improper settings. A few issues are easy to correct without professional help.

How do I turn off my LED porch light?

Quote from the video:
Quote from Youtube video: Just double flick the switch.

How do you block motion sensors?





A quick solution that customers have said works well is to use black electrical tape to cover part of the sensor. Start by covering the edge of the sensor on the side you want to keep out of the detection area and use small pieces of tape to block it out.

Why does my outdoor sensor light not turn off?

If your outdoor security light won’t turn off, it’s most likely because of one of these problems: The sensitivity settings are too high. The duration settings are too high. It’s stuck in auto mode.

How do you reset sensor lights?

Quote from the video:
Quote from Youtube video: When the light comes on turn the switch to the off position then wait 5 to 7 seconds before turning it on again. The light should now be off and the motion detection unit reset.

Why does my dusk to dawn light stay on?

Potential issues could include a fixture or lamp shade that blocks the light, usage in-doors in a room without direct sunlight, or the light sensor could be faced toward a wall or inside a fixture without access to sunlight.

How do you adjust a dusk to dawn light sensor?



To adjust the settings of these sensors, simply follow the following steps:

  1. Install the app and link it to your dusk to dawn light sensor. …
  2. Find the settings page for the device you’re wanting to adjust.
  3. Change the settings you’re not happy with, such as the sensitivity of the sensor or the timer settings.


How do you turn off the motion sensor on a Koda light?

Quote from the video:
Quote from Youtube video: The light can also be dimmed by 50%. Once no motion has been detected after 30 seconds 10 minutes or 30 minutes it can also shut off after no motion has been detected.

Can motion sensor lights be turned off?



Most manufacturers make it a fairly easy process to disable this main feature of the lights. A switch on the fixture should read “on time,” usually found directly under the motion sensor. Set it to any position, aside from the test position, and flip off the switch that the light is connected to.

How do you jam a motion sensor?

A simple silicone spray will blind the sensor, and is invisible to the naked eye. It leaves a trace, but it might not be discovered until much later, if at all. Alternatively, you could place glass in front of the sensor when it was off, which would do the same thing.

How can I block my neighbors motion light?

How To Block Your Neighbor’s Light [5 Helpful Solutions]

  1. Install a privacy fence or side awning.
  2. Cover an existing fence with a privacy screen.
  3. Provide shade for your garden.
  4. Hang blackout curtains.
  5. Enlist your neighbor’s help.


How do I deal with my neighbors bright light?



Stay positive and don’t argue. Be tactful and understanding about your neighbor’s right to light their property. Suggest alternatives to their current fixture. Ask them to move the light, shield it, or add a motion sensor so it’s activated only when needed.

Can I complain about security lights?

The council can investigate complaints about outdoor lighting and take action to address incidents which are assessed to be a ‘statutory nuisance’. The following can cause artificial light nuisance if not maintained or used properly: domestic and commercial security lights.

Does my Neighbour have a right to light?

A right to light may be acquired by ‘anyone who has had uninterrupted use of something over someone else’s land for 20 years without consent, openly and without threat, and without interruption for more than a year.

Can my Neighbour block my sunlight?

In most cases, no, you cannot force a neighbour to cut down a tree in order to bring light into your garden. You may, however, be able to get the tree cut back if it is blocking light from passing through a ‘defined aperture’ in your property, such as a window or glass door, for example.

What is the 45 degree rule?



‚Äč The 45-degree rule is assessed on both plan and elevation. An extension should not exceed a line taken at 45 degrees from the centre of the nearest ground floor window of a habitable room in an adjoining property.