How do you wire a ceiling fan with a remote to two wall switches?
Connect the black wire from the ceiling to the black wire on the input side of the remote receiver module. Connect the blue wire from the output side of the remote receiver module to the blue wire in the fan. Connect the red wire from the ceiling to the black wire in the fan.
Can I use the fan remote and the wall switch?
You can wire a new ceiling fan with a remote to a wall switch or retrofit an older fan to accept an aftermarket remote kit.
How do you wire a ceiling fan with a remote and one wall switch?
Quote from the video:
Quote from Youtube video: Light box you're going to take the wires hook to your ceiling fan and the wires for your wireless remote and each one is labeled according to where it goes.
Can ceiling fans with remote be hard wired?
Then, remove the remote receiver completely. To hardwire your ceiling fan you will need to connect the fan’s power supply to the hard-wiring in your ceiling. This will enable the fan to function via a wall switch. In most instances, the wires inside of a power box are color-coded.
How do you wire a light and fan on separate switches?
Quote from the video:
Quote from Youtube video: The light to the fan fixture. That is the blue wire up to my red wire. And then my neutral which is the white wire to the white wire and the green which is your ground to the copper wire.
Can a ceiling fan have two switches?
Wire Your Fan
A single wall switch controls the power to the fan and light together, whereas a dual wall switch has two separate switches – one for the fan and the other for the light.
How do you wire a Hunter ceiling fan remote?
Quote from the video:
Quote from Youtube video: To wire a fan that has a remote receiver. You'll need to use a wire nut to connect the yellow wire from the receiver. To the black wire from the fan.
What do I do with the red wire when installing a ceiling fan with remote?
The red wire is the ungrounded (hot) conductor from one switch, while the black wire is the ungrounded (hot) conductor from the other switch. In the original installation one switch would energize the red wire causing the fan to come on, while the other would energize the black turning on the light.
Do you need a wall switch for a ceiling fan?
For rooms without switches, ceiling fan remotes can alleviate the need of using a pull chain. Connect the white wires (neutral wires) from your fan and ceiling together. Connect the green wire to your household ground wire (copper/bare wire). Connect the black wires together.
How do you use a Hunter fan without a remote?
To turn it on without a remote, all you have to do is purchase a long pull cord to add to the pull switch, so you can operate it without struggling to reach the pull switch or even fumbling for the remote.
What is the red wire on a ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
How do you wire a ceiling fan with 3 wires?
Quote from the video:
Quote from Youtube video: First connect the ground wires. Together. Then the white. Now connect the light kits blue wire to the red wire in the ceiling. And the black wire from the fan to the black wire in the ceiling.
Can black and red wires go together?
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
Which wire is hot when both are same color?
In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means. In some cases, there will be small writing on the wiring case.
Why are there 2 black and 2 white wires in ceiling box?
So, why are there two black and two white wires in your outlet box? There are two black and two white wires in an outlet box because the outlet is in the middle of a series circuit, accepting power from another source and sending it on. Two cables are hot wires, bringing the power in and carrying it onward to the next.
Why are both black and white wires hot?
Here’s a rundown of electrical wires: The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
Why are there two hot and two neutral wires?
The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.
How do you wire a ceiling fan with two black wires?
You connect THAT black wire to both the black and blue wires of the fan. That second black wire in the ceiling box will only be “live” when 1) the switch is on, AND 2) when the “live” black wire is connected to the taped white wire in the ceiling box.
Can I cap white and black wires together?
Both cases are really dangerous. You shouldn’t connect the black and white wires together! You might want to use the white wire as an alternative to the black.
Does the red wire connect to black or white?
Attach the black wire to the outlet you want to always be on (usually the top one) and the red wire to the switched outlet. Connect the white wire to either of the chrome screws (remember, they are still joined) and the ground wire to the green ground screw.
