Using a hydrogen peroxide solution of 2 pints 3% peroxide to 40 gallons of water, treat tank and run some of the solution into water lines. Let the peroxide solution set in tank and pipes for 2 hours. Solution is not toxic and requires no rinsing It kills off the bacteria.

Can I use hydrogen peroxide to clean water tank?

At a recent RV rally, several speaker/vendors recommended using a mixture of hydrogen peroxide as a disinfectant in the fresh water tank, instead of the traditional bleach. The obvious advantage is avoiding bleach smell in water after rinsing.

How do I disinfect my water heater?





Pour a ½ to 1 gallon of bleach into the water heater through the hot water outlet opening. Install the A420 anode rod. Re-connect the hot water supply line to the hot water outlet on the water heater. Turn on water supply and draw water at each hot water faucet in the residence until a Chlorine odor is noticed.

How do I clean the inside of my hot water heater?

How to Flush Sediment Out of a Water Heater

  1. Turn the Water Heater Off. …
  2. Turn the Cold Water Valve Off. …
  3. Let the water cool. …
  4. Attach a drain or garden hose to the drain valve on the side of the tank. …
  5. Place the end of the hose in a bucket or drain. …
  6. Turn on a faucet (or two) …
  7. Start draining the tank by turning on the drain valve.

How do you remove hydrogen sulfide from a hot water heater?

To get rid of the bad odor, you’ll want to contact a plumber to flush and disinfect your tank. Doing so will remove the bacteria and particles that create hydrogen sulfide. During a water heater flush, a plumber can replace your anode rod if it is corroded to prevent the smell in the future.

How do you remove iron bacteria from a hot water heater?

A chlorine feeder may be the only permanent solution to repeated iron or sulfur bacteria infestation. Turn off gas or electric supply to water heater. Turn off cold water supply valve to water heater or tank. Open a nearby hot water faucet to allow air into the system.

How do you remove heavy sediment from a hot water heater?





4 Ways to Remove Sediment from Your Water Heater

  1. Flushing Your Unit. This technique is good for your unit twice a year to prevent water heater sediment build up. …
  2. Vinegar Soak. …
  3. Maintain Temperature. …
  4. Water Softener Installation.


How do you know if you have iron bacteria?

A quick and easy way to check for the presence of iron and other slimy-producing bacteria is to look in the water closet tank of your toilet. If you see an oily sheen on the surface of the water and can feel a slimy residue on the inside of the tank, slime-producing bacteria are likely present in your water system.

Is it safe to put bleach in hot water heater?

Bleach can be used to disinfect your household plumbing. Clorox bleach can be introduced to a houses’ water system to disinfect the plumbing and hot-water heater. Do this if you notice a bad smell or taste coming from your water.

What kind of bacteria grows in a water heater?



The bacterium that can be found in a water heater is called Legionella. According to the description above, it’s safe to say that it is a prokaryotic cell. It can multiply rapidly in a favourable climate for growth.

Can a water heater make you sick?

Legionella pneumophila may grow in water heaters that are too cold, and getting infected with it can be deadly. Don’t waste time and money pouring chemicals down the drain or into your water heater to try to remove bacteria. Get a plumber to resolve the problem for you once and for all.

How do I get rid of bacteria in my water pipes?

Shock chlorinating water lines is one of the most popular methods for sanitizing pipelines. Chlorine’s powerful germicidal action eliminates slime bacteria, molds, and algae in water pipes.

Why does my hot water suddenly smell like rotten eggs?



The reason your water probably smells like rotten eggs is because it contains some traces of hydrogen sulfide. Even extremely small amounts of hydrogen sulfide can cause your water to have quite the odorous smell! In most cases this smell occurs due to a build-up of hydrogen sulfide in your hot water heater.

How do I get rid of rotten egg smell in my water?

Chlorine bleach can effectively remove medium to high levels (over 6 mg/l) of hydrogen sulfide. The chlorine in the bleach chemically reacts with (oxi- dizes) the hydrogen sulfide eliminating the “rotten egg” odor. Chlorine bleach also reacts with iron or manganese, and disinfects water supplies.

Will running hot water get rid of smell?

Remove this terrible smell from your drinking water by: Run the water faucet for a few minutes and the odor should disappear.