Depending on the manufacturer, drilling new weep holes will void the warranty . Then again, so will installing sideways! Now that is out of the way, I would recommend sealing the original weep holes on the side frame and matching the area of the holes sealed, along the bottom of the frame.

Can you drill into vinyl window frame?

You should not screw directly into the frame of the vinyl window. This can compromise the functionality of the window and also void the warranty—not to mention, the vinyl frame isn’t strong enough to hold the weight of the blinds.

Can a picture window be installed sideways?





You can install a single-hung window horizontally just as easily as you can install it vertically, but really you should avoid horizontal installation.

Can you install a vinyl window sideways?

NO, you cannot install a window in the wrong orientation. Glass is “set” in window frames using “setting blocks”. These blocks are made for the weight of the glass to rest on. They are sized and distributed according to the weight of the glass.

Do vinyl windows have weep holes?

What are Weep Holes? Weep holes are small openings located at the bottom of the exterior frame of your replacement window. Although not all windows have weep holes you may see them on vinyl or metal window frames.

Can you drill into vinyl?

So, can you drill into vinyl siding? You can safely drill into any vinyl sidings if you take a few precautions and follow the correct steps. However, you should avoid doing drilling when the weather is cold as the siding can become brittle. You may want to consider using vinyl siding clips instead of drilling.

Can I screw into vinyl?





A stainless steel screw is the very best, but also the most expensive. Vinyl coated screws are great too. In most cases you can purchase these in rather small quantities. No matter which screw you buy, make sure it is a Phillips head screw because they are the easiest to use.

Can you drill weep holes in windows?

If your storm windows don’t have weep holes, you can make some with a drill and a 1/8-inch drill bit. Drill two holes into each window frame and watch the water roll off your sill like it was a duck’s back.

Can you install a casement window sideways?

We can install casement windows to open horizontally or vertically.

What is the difference between a casement window and a picture window?

Casement windows offer maximum ventilation, unobstructed views, and have a highly efficient design. Picture windows are fixed windows, meaning that they do not open.

How do you drill a weep hole?



Quote from the video:
Quote from Youtube video: So in order to alleviate. That you drill that a hole in there and I usually suggest an eighth or 3/16 inch drill bit drill. About a few inches above where it screws into the pump.

How do you fix a weeping window?

Interior Condensation

  1. Turn Down the Humidifier. You might notice condensation in your bathroom, kitchen, or nursery. …
  2. Buy a Moisture Eliminator. …
  3. Bathroom and Kitchen Fans. …
  4. Circulate the Air. …
  5. Open Your Windows. …
  6. Raise the Temperature. …
  7. Add Weather Stripping. …
  8. Use Storm Windows.

How do vinyl windows drain?

All types of window have weep holes. Weep holes in vinyl windows work in the same fashion as those in wooden or aluminum frames. The small vents in the vinyl frame prevent water from entering the building by draining through the weep holes.

Are weep holes necessary?



Though homeowners naturally want to block pests, weep holes should not be sealed with caulk or mortar. The holes are still necessary to drain water and to ventilate the air space.

Do vinyl windows have drains?

Quote from the video:
Quote from Youtube video: Windows and patio doors are designed with a weap drainage system on the exterior.

Where should drainage holes be on UPVC window frame?

The drainage holes are located on the inside your door frame in the left and right corners.

How do you stop a window frame from leaking?

Remove damaged exterior caulking, clean the window frame and recaulk. Check the gasket between the window frame and the glass. Re-seal the glass to the gasket with clear silicone caulk. Make sure the sill at the bottom of the window frame is pitched downward to drain water toward the exterior.

Can I drill through uPVC window frame?



Yes, you can drill into uPVC windows – for example you may want to fit blinds to your windows. However, doing so may compromise your guarantee. If you are unsure, then it is always best to speak to a qualified installer.

Do windows need drains?

They’re Fundamental for Waterproofing a Basement



Waterproofing your windows, therefore, is one way to prevent water from entering your home. For basements, that means installing a window well drain. While most basement windows come with wells, those wells can only hold so much water before it goes through the window.

How do you clean weep holes in vinyl windows?

To make sure the weep holes are working properly, spray the outside of the window with a garden hose – a steady stream of clean water should exit from the holes. If it doesn’t, use a wire hanger or compressed air to force the blockage out. Re-test with fresh water to ensure they’re completely cleaned.

Can you cover window weep holes?

Weep hole covers have one-way vents that prevent drafts and dirt from entering the home while still letting the water escape, as well as making the window more aesthetically pleasing. If the vent of the weep cover is damaged or missing, the weep covers should be replaced.