Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

How do I know what model kitchen faucet I have?

On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012. Look for the tag on one of the faucet’s supply lines.

How do you tell which Moen valve I have?

If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.

Do Moen faucets have serial numbers?

The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.

How do I tell what cartridge My Moen faucet is?

Quote from the video:
Quote from Youtube video: Simply by going to your faucet years ago go into your faucet. And pull them pulling. On your cartridge if the handle pulls out it's a 12 25 cartridge.

How do I identify my faucet cartridge?

Quote from the video:
Quote from Youtube video: Another quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.

How do you replace a Moen kitchen faucet?

Quote from the video:
Quote from Youtube video: Next we must relieve any pressure from the existing faucet. Now we can disconnect the supply lines from the shut-off. Valves. Now the Frank has disconnected the mounting for the old faucet.

What is the difference between a Moen 1222 and 1225 cartridge?

The biggest difference between the Moen 1222 vs 1225 cartridges is how the shower valve handle turns the water on. Shower valves with the Moen 1225 cartridge are turned on by pulling the handle out and then adjusting the temperature by turning the handle to the left or right for hot or cold water.

Does Moen give free replacement parts?

If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal

What’s the difference between Moen 1225 and 1225b?

Q:What is the difference between 1225 B cartridge and 1225 ? A: According to Moen, they are the same cartridge. There used to be a difference in the packaging (bulk pack vs retail pack), but the packaging is even the same now.

How do I change a Moen cartridge?

Quote from the video:
Quote from Youtube video: Make sure the cartridge is in the on position the notch in the stem should be facing up remove the cartridge from the valve. You can also use the Moen cartridge removal tool to pull out the cartridge.

Are faucet cartridges interchangeable?

Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.

How do you match faucet stems?

Quote from the video:
Quote from Youtube video: The splines hold the handle in place so that when you turn the handle on the stem is opened each manufacturer uses the same number of splines on each of their stems.

What are faucet splines?

Splines are the pointed ridges that are around the top of a stem, and knowing the number of splines inherently determines the broach letter. To start, darken one of the splines with a black permanent marker. Us this spline as your starting point. Count the number of splines around the top of your stem.

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
7 янв. 1990

What is the stem on a faucet?

The stem is all the moving parts within a faucet. It has different functions, including how much hot and cold water you receive, and lets you change the water’s temperature. Each handle has its own stem assembly. Plumbers often identify faucets by the type of stem system they use.

What does a faucet stem look like?

Quote from the video:
Quote from Youtube video: The cartridge or stem is basically all the moving parts with inside this faucet it tells how big the openings are how much hot water how much cold water and allows you to change the temperature.

What are the parts of a kitchen faucet called?

Faucet Parts

  • Faucet Aerators.
  • Faucet Hardware.
  • Faucet Stems & Cartridges.
  • Valve Trim.
  • Faucet Handles.
  • Diverters.
  • Faucet Spouts & Kits.
  • Body Sprays.