What does CU mean in plumbing?
Copper
Copper. One of the basic elements (Cu), copper is used for plumbing piping, and is one of the alloys used to make brass, a key material in the manufacture of faucets and fittings.
What does WC mean?
water closet
water closet … it is now possible to take your gadgets into that most holy of places: the toilet. The WC.
What does LAV stand for in plumbing?
LAVATORY
LAVATORY (“LAV”) A fixed bowl or basin with running water and drainage for washing. Many use the word “lavatory” as meaning a bathroom.
What does bt mean in plumbing?
Plumbing and Fire Protection Abbreviations
| AP | Access Panel |
|---|---|
| BT | Bath Tub |
| BWV | Back Water Valve |
| CFH | Cubic Feet per Hour |
| CFM | Cubic Feet per Minute |
What does FIP and MIP mean?
Other Notes About Thread Sizing
MPT stands for Male Pipe Thread and MIP stands for Male Iron Pipe which both indicate a male fitting with NPT threads. FPT stands for Female Pipe Threads and FIP stands for Female Iron Pipe which both indicate a female fitting with NPT threads.
What does NPT mean in plumbing?
National Pipe Tapered Thread
The best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal is the American National Pipe Tapered Thread, or NPT. NPT has a tapered male and female thread which seals with Teflon tape or jointing compound.
Is WC and toilet the same thing?
In British English, “bathroom” is a common term but is typically reserved for private rooms primarily used for bathing; a room without a bathtub or shower is more often known as a “WC”, an abbreviation for water closet, “lavatory”, or “loo”. Other terms are also used, some as part of a regional dialect.
What is a WC in a house?
WC stands for “Water Closet” and, technically, refers to a toilet or a room with a toilet.
Why is WC called water closet?
In the late 19th century, when indoor plumbing began being installed in homes, people had to make room for the fixtures that were going to be used. One common place to install a toilet was a remodeled clothing closet. Since it was the one place in the home that had indoor water, it was called the “water closet.”
What does Ch mean in plumbing?
Part Number Abbreviations
| Code | Description |
|---|---|
| CH | Cross Handle |
| CO | Center Outlet |
| CW | Cold Water |
| CX | Integral Check |
What does SXS mean in plumbing?
Slip X Slip
2″ Elbow 90 Degree SXS Sweep (Slip X Slip) Sweep means it has a softer bend to allow water through easily to ensure a proper flow. “Slip” “Slip Socket” and “Socket” all mean the same thing. The pipe glues into it.
What does SV mean in plumbing?
Stuart Khan on Twitter: “Finally, “SV” stands for “sluice valve“, which is an on-off tap fitted to a water pipe. The water utility can use it to isolate sections of the water supply for maintenance or to shut of major leaks.
What does DT stand for plumbing?
DT- discharge tower DISCHARGE TOWER Above ground chamber. Keeps pressure head up in pipe.
What does SV valve stand for?
What Does Safety Valve (SV) Mean? A safety valve is a type of automatic pressure relieving device that activates by the static gas or vapor pressure upstream of the valve by automatic release of substances through rapid full opening or pop action to avoid accidental explosion.
What is the function of sluice valve?
A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.
What is difference between gate valve and sluice valve?
The difference between Sluice Valves and Gate Valve is that the Gate Valves are generally used for water or water like fluids, while a Sluice Valve is recommended for Slurries. Type of Valves: Non Rising Spindle and OS&Y Rising Spindle. Operation: Manual, Gear Operated, or Motorized.
Which valve is NRV?
A non-return valve, also known as a check valve, clack valve, one-way valve or retention valve, is designed to allow fluid to flow in one direction only, therefore preventing the liquid or gas from flowing back upstream of the valve.
