Can you install a shower niche in an exterior wall?

Here’s how it works: Most exterior walls are 2×6 framing. I recommend buying a pre-made foam niche such as the Laticrete Hydroban niche, Noble Niche, or Schluter Kerdi Niche. A recessed shampoo niche from Laticrete is added in front of the foam increasing the r-value of this exterior wall.

How do you insulate a shower niche on an exterior wall?





You can put rigid foam insulation between the back of the niche and the wall sheathing, polyiso is R7 per inch. Then you could bring the face of the niche into the shower a couple of inches to compensate for the loss of depth. That’s for a 2×4 wall.

What wall should a shower niche be placed?

For this reason, the wall opposite the shower head is the most popular place for shower niches. Regarding shower niche height – if it’s a regular stand up shower, a placement height above the waist (approximately 3 feet from the shower pan/base) would be most convenient for reach.

Is a shower niche a good idea?

A shower niche is a much better solution, for relatively little expense. It’s an extremely useful feature that provides you with a proper place to keep your shower accessories, without adding bulky organizers that take up much-needed space.

Is it OK to have plumbing in an exterior wall?

The best practice for builders and designers is to avoid running water pipes in exterior walls or through unheated attics. It is preferable to design the home so that plumbing fixtures align with interior walls. If pipes must be run in exterior walls, the pipes should be insulated.

Are wall niches outdated?





Wall niches are nothing new, but designers say they’re seeing more homeowners embrace them as smart storage solutions in pint-size spaces. The best part: They look beautiful. So it’s time to put mounted shelving on, well, the shelf.

How do you edge a shower niche?

Quote from the video:
Quote from Youtube video: And clean out the expansion joint between the tiles in the niche. The next step was to do the first row of the main part of the niche. So i applied thin set directionally troweled that in place.

How do you waterproof a shower niche?

Waterproof Shower Niche

  1. To waterproof a tiled niche, apply waterproof backerboard to the inside surfaces of the niche. …
  2. Next, apply waterproof membrane, bedding it in unmodified thinset. …
  3. With the waterproofing complete, install the tile starting with the bottom of the niche, which should have a slight pitch for drainage.


How high should a shower niche be from the floor?



roughly 38″ to 60″

Most people would say that they prefer their shower niche to be placed anywhere from elbow height to eye height when standing. This translates to roughly 38″ to 60″ from the ground on the average adult. This height makes it easy to quickly grab bottles of shampoo in the shower without having to reach up or bend down.

Does a shower niche have to be centered?

I see no reason it needs to be centered. I would put it either on the same wall as the shower head, or on the back wall near the corner, to keep it out of the shower spray.

How do I add a shower niche to my shower?



5 Easy Steps To Add A Shower Niche (Easy DIY)

  1. Step 1 – Choose the Size and Style. Choose the size, style and location of your shower niche. …
  2. Step 2 – Prep The Wall for the Shower Niche. Cut an opening into the wall and install blocking. …
  3. Step 3 – Install the Shower Niche. …
  4. Step 4 – Upgrade (optional) …
  5. Step 5 – Decoration.


How do you install a shower niche?

Quote from the video:
Quote from Youtube video: To find the corner location of your shower niche. Using the shower niche mark the location by tracing around the perimeter of the shower niche. Making sure that the shower niche is level and plumb.

How do you install a wall niche?

Cut each opening carefully using your utility knife or drywall saw. Sand the front surface around opening until it is flat. Apply construction adhesive around the opening and place niche inside, using drywall screws to hold niche in place. Finish using traditional drywall methods—drywall tape and mud.

How do you build a recessed niche wall?



Quote from the video:
Quote from Youtube video: Now I'll put my two rolls on two lines in and I'll cut the plasterboard. Out. Now that I've made my cap I've checked that the nice does fit I'm ready to secure it in with some screws.

How do you build a bathroom wall niche?

[How-to] make a wall niche in your bathroom

  1. Determine location & Cut out cavity. Place the build-in set into the desired position. …
  2. Clean work area & apply sealant. …
  3. Apply self-adhesive waterproofing membrane. …
  4. Apply sealing compound. …
  5. Start tiling. …
  6. Insert wall niche.