What insulation should I use in my attic ceiling?

If you’re finishing your attic, insulating it to the proper R-value can cause a dramatic loss of headroom if you limit yourself to fiberglass batts. To maximize headroom, properly insulate your attic and ventilate the roof, use a combination of dense batt insulation, rigid foam sheeting and air chutes.

Should you insulate attic ceiling?





Should you insulate your attic roof? Insulation is a wise choice to increase the energy efficiency of your home. Quality insulation will make it more cost-effective to heat and cool your home, The Department of Energy’s estimates range from a 10% to 50% savings, depending on several factors.

What is the best ceiling insulation material?

Spray foam insulation



One of the most common and effective ways to insulate your roof is with polyurethane spray foam. This spray-applied plastic is known to be highly effective for sealing any cracks as well as resisting wind and heat.

What is the cheapest way to insulate an attic?

Quote from the video:
Quote from Youtube video: Just take an unphased insulation a roll it right on top and that one step there make it home much more energy-efficient.

Can you put too much insulation in your attic?

It’s possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.

Does ceiling insulation need a vapor barrier?





Fiberglass Insulation



In most climates, it needs a vapor barrier. Some builders rely on batts with attached kraft-paper facing to do that job, but Tom recommends unfaced batts, covered in plastic with all the seams taped shut.

Should I insulate between the rafters in my attic?

The general advice we give is that you should always insulate between and above the rafters (warm roof) or between and under the rafters (cold roof).

Is it better to insulate ceiling or roof?

If you are deciding between insulating the roof deck or the ceiling, Insulating your ceiling should be the priority. Not only is it easier but ceiling insulation is beneficial in a number of ways: Keeps the temperature in the building regulated. Saves on energy costs.

How many inches of insulation should you have in your attic?

about 10 to 14 inches



The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.

What is the cheapest ceiling insulation?

Fiberglass batts are typically the cheapest insulation, but a loose corner or tear can diminish the insulation quality.

Is spray foam insulation in attic worth it?

A properly done spray foam job not only insulates but also greatly reduces the air leakage of a home. But that only works if the installer can get it into the places where most of the air leakage happens. In an attic, the eaves are one of the most critical places to get good coverage with the foam.

What is the cheapest insulation material?



fiberglass

The most common form of home insulation is the “batt and roll” or “blanket” type, which is the least expensive to purchase and install. Its most common material is fiberglass, but if you’re looking for an alternative, check out these natural fiber options: Mineral wool.

What can I use instead of fiberglass insulation?

Fiberglass Insulation Alternatives

  • Hemp. Hemp insulation is another insulation alternative with immense advantages. …
  • Wool. Natural wool is another insulation material to consider. …
  • Aerogel Insulation. …
  • Polystyrene Insulation. …
  • Thermacork Insulation. …
  • Sheep’s Wool Insulation.


What can I use instead of foam board?



For foam insulation board



Where framing is available, or if it’s possible to add it, you can always substitute non-rigid insulation materials like: Fiberglass batts; Rock wool batts;. Blown-in fiberglass or cellulose, manufactured from recycled paper and similar products.

Is spray foam insulation cheaper than fiberglass?

Spray foam insulation is considerably more expensive than fiberglass insulation. In some cases, the price of spray foam insulation can exceed that of fiberglass by three times over. As such, fiberglass is often the insulation material of choice for those searching for an inexpensive insulation solution.

What are the disadvantages of spray foam insulation?

List of the Cons of Spray Foam Insulation

  • Spray foam insulation does not always fill every possible cavity. …
  • Spray foam insulation might encourage water damage for some homeowners. …
  • Spray foam insulation can sometimes shrink. …
  • Spray foam insulation requires a lot of experience to get it right.

Can you spray foam attic ceiling?

Insulate the attic or roof of a new home by installing spray polyurethane foam insulation – either open cell or closed cell – on the underside of the roof deck.

Can mold grow on spray foam insulation?



As a product, spray foam insulation does not attract mold. And unlike wood or metal, spray foam does not rot, rust or deteriorate. This means that an area properly sprayed with foam insulation will never become a food source or a hospitable environment for a mold colony.

Which is better spray foam vs blown-in insulation?

Between spray foam and blown-in cellulose, which is better? Both spray foam and blown-in cellulose insulation have their advantages. Spray foam has a higher R-value, so it’s the more effective insulator.

Is spray foam insulation pros and cons?

A Breakdown Of The Pros & Cons Of Spray Foam Insulation

Pros and Cons of Spray Foam Insulation
Advantages Disadvantages
Creates a highly energy efficient thermal envelope Upfront costs are high and installation is expensive
Extraordinary thermal qualities Payback takes 2-4 years
Lower ongoing energy costs Not a DIY product