Yes, the threaded brass drop ear elbow is the right fitting. It provides a strong mounting to the stud behind the wall allowing you to really tighten the arm.
What are drop ear elbows for?
Drop Ear Elbows allow to transition between PEX pipe and threaded pipe, Such as shower arms, Show jets, Tub spouts, etc. Drop ear elbows have mounting “ears” with holes, Which allow to secure the fitting to a wooden surface such as Stud, Plywood, etc.
How deep should a drop ear elbow be?
Answer: The perfect height for your shower’s drop ear elbow is around 78-80 inches.
Are all shower arms threaded?
Shower arms typically have a slight bend near their middle, and they almost always have threads on both ends. One end threads into a fitting called a drop-ear elbow inside the wall; the other end receives the showerhead, which simply turns onto the exposed end of the arm.
How do you install a shower elbow?
Youtube quote:Before we put the shower I'm into the wall we want to put the escutcheon on the shower arm it just slides on and then we just insert the shower arm into the wall.
What is PEX A and PEX B?
PEX A is made using the Peroxide, or Engel, method. PEX B is formed using Silane, or Moisture Cure, method. This is the most common PEX pipe type out there. PEX C is created using the Electronic Irradiation, or Cold, method of cross-linking.
What is a drop ear 90?
These solder fittings connect to copper pipe. Drop ear elbows allow for the elbow to be mounted and secured to a stud, plywood, etc.
How far should a shower head be from the wall?
Typically, a wall-mounted or fixed shower head should be about 3 to 4 inches from the wall. If you angle the shower arm at 100 or 120 degrees, you’d have enough space to move around your bathing enclosure without bumping against the wall.
What height should a shower valve be?
The average height for a shower valve is 30-50 inches above the floor, though this is a general range. For tub-shower units, the height can be just a few inches about the tub or directly on the tub as part of the faucet.
How do you install a shower drop Ell?
Screw the drop ell to the exposed end of the pipe. Tighten it as much as you can by hand, then drape a rag over it and continue tightening it with adjustable pliers. When fully tightened, it should sit flush against the wall, and the male threaded connection for the shower hose should face down.
How do you attach a shower arm flange to the wall?
Youtube quote:Here I'm applying a small bead of silicone caulk against the shower flange. And the shower wall. Once that's done I will wet my finger in some warm water and smooth out the caulk.
How tight should a shower arm be?
The arm should not be tightened more than a total of six revolutions. Pro Tip: Sometimes you can tighten the shower arm without the use of a wrench if you can get the right amount of leverage. Otherwise, a professional grade strap wrench is the best type to use so you don’t scratch the shower arm.
How do you fix a shower arm to the wall?
Youtube quote:This older shower arm that's a bit worn off and this flange has loosened up and is coming off the wall. We just want to upgrade. The quality of it and we're also gonna change out the finish to Chrome.
Are shower arms universal?
Most homeowners with standard piping in their homes can simply pick up any shower head from a retailer. Modern shower heads are designed to universally fit all 1/2 shower-arm pipes.
Do all shower arms unscrew?
You don’t have to unscrew and remove the showerhead first — that’s up to you. If the shower arm won’t budge or it isn’t bent in a way that gives you a mechanical advantage, wrap a rubber glove around the pipe or put it on to get a better grip. The vast majority of the time, the arm will come off.
How do I stop my shower arm from moving?
Youtube quote:Before it really starts sticking. The stuff. We're just gonna kind of shape it to where it'll go right around the hole. And then take off one of my gloves. So I can hold the camera.
Is it OK for a shower arm to move?
There shouldn’t be any movement in the shower arm, only in the showerhead. There is a valve in the wall that controls the hot and cold water. From this valve is a riser that goes up the wall and connects to an elbow with a female thread.
Why is my shower arm loose?
It may be that the riser wasn’t strapped to the wall, or it may be that you need to reinstall the shower arm; you would likely see evidence of a water leak. You can check for leaks by removing the showerhead, then screwing a cap onto the end of the shower arm.
