Where is AFCI not required?

AFCI protection is not required for outlets located outside or in garages or bathroom areas. (B) All 15A or 20A, 120V branch circuits supplying outlets in dormitory unit bedrooms, living rooms, hallways, closets, bathrooms, or similar areas.

Where are arc-fault breakers required 2020?





In the 2020 edition of the NEC®, Section 210.12 requires that for dwelling units, all 120-volt, single-phase, 15- and 20-ampere branch circuits supplying outlets or devices installed in dwelling unit kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, …

Where do I need AFCI outlets?

AFCI outlets are recommended for the following locations in a house: family rooms, dining rooms, dens, bedrooms, closets, hallways, recreation rooms, sunrooms.

Are AFCI required in Canada?

Arc-Fault Circuit Interrupter (AFCI) protection has been required in the Canadian Electrical Code and the Winnipeg Electrical Bylaw to varying degrees since 2003. Since that time, the Code requirements for arc-fault protection have expanded from sleeping rooms only to virtually the entire dwelling unit.

What needs to be AFCI protected?

As of the 2014 NEC, AFCI protection is required on all branch circuits supplying outlets or devices installed in dwelling unit kitchens, along with the 2008 NEC additions of family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and …

Where are AFCI breakers required 2021?





16 states that AFCI protection is required for all 120-Volt, single phase, 15 and 20 amp branch circuits supplying outlets or devices installed in living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and similar rooms or areas.

Is AFCI required in a garage?

The 2017 National Electrical Code (NEC) requires the protection of an arc fault circuit interrupter (AFCI) for 15 and 20 amp circuits in all newly built residential areas, but they are not needed in bathrooms, garages, or outdoor areas.

Can I use AFCI outlet instead of breaker?

Yes, all Leviton AFCI outlets meet UL Standard 1699A (Arc-Fault Circuit-Interrupters, Outlet Branch Circuit Type) for AFCI and meet UL Standard 498 for outlet. Why would I use AFCI outlet instead of breaker? The AFCI outlet can be a great alternative depending on the circumstance.

Does refrigerator need AFCI?

Refrigerator Circuit



This circuit usually does not require GFCI protection unless the outlet is within 6 feet of a sink or located in a garage or basement, but it generally does require AFCI protection.

Do lighting circuits require AFCI?

AFCI requirements.

The NEC requires that virtually all branch circuits for lighting and receptacles in a home must have arc-fault circuit-interrupter (AFCI) protection.

What needs to be AFCI protected in Ontario?



The Canadian Electrical Code requires homes to have arc-fault circuit protection installed for 125Vac, 15A and 20A circuits supplying receptacles throughout the home (with some exceptions).

Does an AFCI outlet protect the whole circuit?

An AFCI device protects the entire circuit from the electrical panel through the downstream wire to the outlet, along with all appliances and equipment plugged into that circuit. If an AFCI device trips, it is most likely the result of a potentially dangerous arcing condition detected by the device.

Are AFCI breakers reliable?

There’s no reliable method for testing AFCIs (the test button isn’t always accurate). If the nuisance tripping stops, then the old arc fault breaker was probably defective.

Are AFCI outlets worth it?

AFCIs have proven so effective at preventing electrical fires that the National Electrical Code (NEC) requires AFCIs to be installed in almost every room in newly built houses. Bathrooms, garages, and unfinished basements—areas defined as non-living spaces—are among the few exceptions.

Where are AFCI required 2017?



As it’s already well known, dwelling units currently require AFCI protection. Now the 2017 NEC is expanding protection to guest rooms and dormitory bathrooms and circuits supplying outlets and devices.

Do 240V circuits need AFCI?

No — the 2014 NEC only calls out AFCIs for 120V, 15 and 20A outlets — the dryer is 240V, so it doesn’t need an AFCI.

When did AFCI become required?

1999

In 1999, AFCIs became a requirement in the National Electrical Code (NEC®). An AFCI breaker provides a higher level of protection than a standard circuit breaker by detecting and stopping a hazardous arcing condition before it can become an electrical fire.

Do kitchens require AFCI?



The latest National Electrical Code requires both AFCI and GFCI protection only in kitchens and laundry rooms. And within those rooms, the Dual Function AFCI/GFCI Receptacle provides what is called “feed-through” protection, which means it provides protection for all wiring and extensions attached to the load side.

Does microwave require AFCI?

A dedicated 20-amp circuit is needed to feed the microwave oven. Since the appliance is plugged into an outlet, AFCI protection is required.

Do bathrooms require AFCI?

Note: Arc-Fault Circuit Interrupters (AFCIs) requirements have not expanded to the entire dwelling unit (to include bathrooms, basements and crawl spaces).