Yes, it’s perfectly fine to use the main panel as a junction box to the sub @johns. You only need to extend hot(s) and neutral.
Do I have to run conduit to a sub panel?
Moderator. Unless you area requires conduit for wiring in dwelling units there is no NEC issue with running a cable as a feeder. It must be a 4 wire cable to the sub panel.
How far can I run a sub panel from the main panel?
You must provide from 3 to 4 feet of clearance on all sides of the panel depending on the voltage to ground. You may not know this voltage, so it’s best to provide 4 feet. The panel must be easily accessible, so don’t install it too far above the floor; 4.5 to 5 feet is about right.
Can I run a subpanel from another subpanel?
Can I run a subpanel from a subpanel? Generally speaking, yes. You could put a million subpanels in series, and by itself that wouldn’t be a code violation. The metal conduit can act as the equipment ground so a 4th wire is not required.
Does a 60 amp sub panel need a main breaker?
Your subpanel does not need a main breaker if it’s in the same building. If it is in an outbuilding, you need a disconnect switch, and the breaker will suffice but its size doen’t matter.
How do you run a 60 amp subpanel?
Quote from the video:
Quote from Youtube video: I have installed it's a 60 amp breaker. So I'm feeding a 60 amp subpanel. And one thing to kind of keep in mind and when you're planning all this is breakers protect downstream wires.
Does a subpanel need to be grounded to the main panel?
Most panels come with a bar joining the two, which is easily removed. Code requires subpanels to have a ground connection that’s independent of the main panel’s.
What is the electrical code for sub panel?
___ NEC 110.26(A) – The working space about electrical service panel/sub-panel shall be at least 3 ft. in front of the electrical panel. The width of the working space shall be 30” or greater, and the height of the space shall extend from the floor to 6 1/2 feet or the height of the panel, whichever is greater.
How many breakers can a 60 amp sub panel have?
Modern 60-amp electrical panels are purpose-built as sub-panels and generally only have 8 to 10 slots available for circuit breakers.
Is there a minimum height for a subpanel?
The panel only has to have 30” wide measured from one side or the other or centered or the width of the panel if larger than 30” , the door has to open to 90 degrees and the height of the working space 6-1/2′ no minimum for height .
What size wire do I need to run 60 amps 100 feet?
What size wire should I use for a 60 amp subpanel? You can get away with 6 AWG when you have a short run of wire, however, due to voltage drop, if you ever decide you want to go more than 100 feet then a 4 AWG is the size you should choose.
What size wire is needed for 60 amps?
For 60 ampere breakers, electricians and professionals suggest using a wire size gauge ranging from 6 AWG to 4 AWG.
Can a 60 amp breaker feed a 100 amp sub panel?
You can feed a 100 Amp panel with a 60 Amp breaker. Keep in mind that the sub panel needs to be rated above the breaker size.
How much can a 60 amp panel handle?
The National Electrical Code always takes safety into consideration when making its recommendations. Sure, a 60-amp breaker can completely handle certain classes of electrical distribution up to its 100% capacity of 60 amps. Nonetheless, these are fewer than most common setups.
How many amps can a 60 amp double pole breaker handle?
Details
| Breaker Type | Double Pole | Electrical Product Type |
|---|---|---|
| Interruption Type | Standard Trip | Maximum Amperage (amps) |
| Mounting Type | Plug-On | Number of Poles |
| Pack Size | 1 | Power Distribution Features |
| Product Weight (lb.) | .68 | Returnable |
Can you sell a house with 60 amp service?
That sticker is the manufacturers rating of the piece of equipment only. Realtors working for buyers today are asking for up to $10,000 off the selling price if you still have a 60-amp service. The cost of a residential 60-amp service upgrade usually costs less than $3,000.00.
What can a 60 amp service run?
Electrical Load Box Sizes
A small, 60-amp fuse box might be found in an older home that has not had its wiring upgraded. It can supply power to only one 240-volt appliance, such as an oven or a clothes dryer.
What can 60 amp service handle?
A house with a 60 amp service and gas appliances has almost as much usable electricity as a house with a 100 amp service and an electric stove and electric clothes dryer. Most 60 amp services are found on older systems which have a limited number of circuits.
