https://youtu.be/rOBcLkpWGrU
Should shower corners be grouted or Siliconed?
It’s essential to use caulk, not grout, in shower corners. Grout does not hold up well in corners and is prone to cracking and falling out. This is because the tiles on the two perpendicular walls expand and contract with temperature changes.
Should you grout bottom of shower?
Grout is the better choice for wet areas.
Though grout is more porous than caulk, it’s best for tiled shower walls and floors. This is largely because of the way grout binds with backer board, the concrete material placed behind tiles.
How do you tile around shower hardware?
Quote from the video:
Quote from Youtube video: This is around a shower fixture so a shower valve in your shower right you need to cut a circular cut. And a shower fixture. This is what's called a mud cap.
How far should shower valve sticks out from wall?
A shower valve should not stick out too much from the wall. It’s recommended for the base of a shower valve to sit flush against the wall. In general, a shower valve can stick out 3-4 inches from the wall. If it sticks out too much, this can look odd and take away from the shower’s aesthetic.
Do you grout between tile and wall in shower?
If your tile is flush against the wall, a settling house can crack tiles or grout. Because caulk is flexible, it makes the perfect material for filling gaps between tile and walls. Leave a 1/8 inch (6 mm) gap between the tile edges and the wall. Fill the gap between the tile and the wall with silicone caulk.
Can I use caulk instead of grout in shower?
Caulk is silicone, acrylic, or latex based, which is flexible and can help absorb movement, whereas grout can crack. Caulk is used to waterproof joints for space like bath tubs, showers, windows etc. Caulk is strong enough to adhere to tile surfaces without crevices.
What do you do if your shower valve sticks out too far?
Quote from the video:
Quote from Youtube video: And push it back or go in from the back wall neither of these are viable options I did not want to move the backplate. Forward by putting a ring behind it because that would look tacky.
How do you secure a shower valve?
An adjustable fan brace, wire wrap, and silicone. Get an adjustable fan brace and install it right over or behind the valve. Once it is fully secure wrap the valve (ALOT) in many directions. There is also creative uses of mounts and brackets attached to the brace.
Where do you mount a shower valve?
Quote from the video:
Quote from Youtube video: So we place it about 16 inches off the tub deck. And we use 3/4 inch plywood. To space out the tub. And get it set so we actually had to nail.
How far back do you mount a shower valve?
The center line of the supply and discharge piping should be a maximum of 2-3/16″ (56mm) and a minimum of 1-7/16″ (37mm) behind the finished wall surface.
Can you use a shower tub valve for shower only?
Can a tub and shower faucet be used just for a shower? Although it is easier and more cost effective to use a fixture designed with only a shower head control, you can use a tub and shower faucet in a shower-only installation.
Can you replace shower fixtures without removing tile?
While your plumber will take great care to cut or remove only enough tile as necessary, you could face some minor tile repair depending on the size of the opening. Most tile repairs under these circumstances can be addressed by installing an oversized escutcheon to cover the larger opening in the tiled wall.
Can you replace shower trim without replacing valve?
Simply replace the visible trim for an brand new appearance
Change out tub/shower control handles and spouts to achieve a brand new look, without redoing the valve plumbing. Use a simple replacement kit.
Can shower valve leaking behind wall?
Most times shower valve leaks behind the wall are very slow. Usually, they are pinhole leaks from a faulty valve or sloppy soldering from the water connection points to the valve. Over the years the joint wears out or the flaw in the casting process of the valve rears its ugly head.
Do you need to replace shower valve?
The first issue to look for is if there are any leaks in the valve when you turn on the water. If there are drips, that’s a good indication that you should think about replacing the valve. Because, not only are you wasting water, but water that leaks behind the wall can cause rot as well as mold and mildew growth.
How long do shower valves last?
A properly installed shower valve should serve you well for a long time. Even if you live in an area with hard water that causes limescale build-up in your appliances, you can expect to have a shower valve work well for about four or five years.
Is a shower valve the same as a cartridge?
The shower valve is the inner device within the wall that regulates water temperature, flow, and output to the showerhead, tub spout, and other shower accessories. The cartridge in the valve connects it to the external trim handles as a supporting player in controlling the water flow and temperature.
