Can the shower drain be in the wall?
A linear shower drain can be installed in 4 different ways, either wall mounted (one-sided or three-sided) or floor mounted (free in the floor or between two walls).
Does a bathtub drain go straight down?
What does any of this have to do with your bathtub drain plumbing? The reason why drains don’t go straight down to the sewer is that while it would be more efficient and eliminate clogged pipes, it would also allow dangerous sewer gasses to seep into your home.
How far should bathtub drain be from wall?
Bathtub Drain Measurements
The drain hole should be a minimum of 12 inches away from the wall and 9 inches in scope. To rough in the drain, use a 1.5-inch pipe.
Where does the bathtub drain go?
The main drain is usually located at the bottom of your bathtub. The overflow component is located several inches under the rim. The two drains connect to various tubes that run from the bathtub and ultimately merge into one central pipe.
Does it matter where the drain is in a shower?
No, shower drains don’t need to be in the center. As long as the drain is at the bottom of a slope so water will flow into it, your drain will work just fine.
Does a linear drain need to go wall-to-wall?
“The ideal linear drain installation is wall-to-wall and against the wall,” says Jonathan Brill, President of Infinity Drain. “We strongly suggest this type of installation not only to enhance the function of the shower but protect the integrity of the rest of the bathroom”.
Do bathtubs need to be vented?
Bathtubs should have a vent to help drain wastewater properly. All drains in your bathroom, from your bathtub to your toilet, need a plumbing vent stack. Without a proper vent, you may hear gurgling pipes, smell a putrid odor, or notice slow-draining water.
Does a shower drain need to be vented?
Vent Pipe Requirements for Showers
It’s easy to forget, but it’s a vital and required part of any plumbing fixture drain. The vent pipes remove sewer gases while allowing air into the system to help the water drain. Without a vent, your shower won’t drain correctly.
Where does shower drain pipe go?
Point drains ideally sit in the middle of the shower floor or by the end of the wall. Either way, the water drains downward by a slope in the bottom. When placed by the wall, the floor is sloped sideways.
How far is shower drain from wall?
Rough-In Dimension Terminology
| Toilet | Shower/Tub | |
|---|---|---|
| Discharge/Drain Hole from Back Wall | 12 1/2″ | 14″ |
| Discharge/Drain Hole (Vertical) | 0″ | 0″ |
| Fixture (Side to Side Buffer) | 15″ to 18″ min | 18″ min |
| Fixture (Front Buffer) | 21″ min | 18″ min |
Where is the P-trap in a shower?
The P-trap is located underneath the shower tray. The P-trap is situated underneath the shower tray and its purpose is to hold a small amount of water to prevent odors from wafting through the drain pipes and into the bathroom. The trap will need cleaning occasionally when a buildup of soap scum occurs.
Do linear drains clog?
Maintenance – Linear drains are easy to clean depending on the material they are manufactured in. Water and soap are the recommended method of cleaning. A good linear drain will have a removable debris basket. This can prevent clogging your pipes, one of the most frequent and expressive problems in any home.
What type of drain is best for shower?
The best type of drain for this situation is often called a “compression,” or “friction,” drain, such as this Oatey 2-Inch PVC No-Calk Shower Drain (available at SupplyHouse), which features a rubber gasket inside the drain body.
What is an infinity drain?
Infinity Drain’s versatile linear drain systems eliminate the use of a traditional center shower drain, allowing for the floor surface to be pitched in one direction, and resulting in no limitation on tile size or slab material.
How far should a linear drain be from the wall?
It is important to remember that these drains are designed for 3pcs clamping ring drains which means the PVC collar has to be 2-3” from the wall. This means the Drain will typically sit 3-5” away from the back wall. It is ideal to take measurements and center the drain on the wall.
Can you put linear drain in center of shower?
Linear drains can be placed in the center of the shower, as seen in the bathroom below by Tego Bathroom Solutions, as long as they are parallel to the opening of the shower.
Where should a linear drain be positioned?
As a general rule-of-thumb, linear drains are located at either the back or side wall of where the fixtures are installed, or along the threshold or entrance.
