How tight should tub drain flange be?
Allow the threads to pull the flange down into the drain shoe. Step 8: Use the drain-removal tool or plier handles to tighten the flange into the drain. The flange should be tight enough to prevent water leaks, but not tight enough to damage the tub.
How do you seal a bathtub drain flange?
Quote from the video:
Quote from Youtube video: The most ideal solution to seal this area is using plumber's putty. Using plumber's putty works best for it creates a waterproof seal when used on wet surfaces.
Why is there water under my bathtub?
Leaking drains are a likely cause of water that seeps from underneath your bathtub. This could be a leak coming from under the drain, which would require the help of a plumber to set right. However, a leaking tub drain could also be caused by a failing seal in the vicinity of the drain assembly.
Do you need a tile flange on a bathtub?
A tile flange is necessary for a tub that will be also be used as a shower, so as to be able to redirect the shower spray runoff correctly back in to the tub without moisture damage to the walls. It’s not necessary for a drop in soaking or jetted tub that has a separate shower.
Can you over tighten a tub drain?
Do this carefully, so as not to squeeze the gasket underneath the tub out of place. The connection needs to be tight to prevent leaks, but tightening it too much risks cracking the tub or breaking the seal.
How do you install a bathtub drain flange?
Quote from the video:
Quote from Youtube video: Tightening always start the drain off hand tight to ensure it isn't being cross threaded snug up the drain with a wrench clean up the plumber's putty and then reinstall.
Can I use silicone sealant instead of plumbers putty?
You can use silicone caulk or plumber’s putty to seal sink drains. Plumber’s putty may crack and cause leaks as the clay dries out with time. But it’s the preferred choice of sealant if you’ll be adjusting or removing the drain.
Where do you put silicone on a bathtub drain?
Quote from the video:
Quote from Youtube video: Apply this applied silicone around the underside of the flange. Use. The entire tube. Then firmly press the universal.
Can I use silicone to seal bathtub drain?
In case you find it challenging to reach the underside area of the tub drainage pipe, then your best option will be silicone caulking. Use the caulk to seal the exposed drain area. Silicone caulking forms a strong, tight seal that doesn’t wash away easily.
How do you cover a tub surround flange?
Quote from the video:
Quote from Youtube video: Center into the OSB or it would be the flange in the center of the flange. All the way around the surround. This will help keep the patch secure. And in place.
Do you put cement board over tub flange?
The backer board should overlap the tub flange so the tile has a stable backing to attach to. This requires shimming the backer board out from the studs so the wall is plumb. There should be a 1/4″ gap between the tub ledge and the backer board.
Does drywall go over tub flange?
Drywall will typically work just fine for a bathtub surround, but more waterproof materials are preferred. A concrete backer board is an excellent water-resistant option and is probably the most popular choice for bathrooms.
How do you tighten a drain flange?
Quote from the video:
Quote from Youtube video: Put on the rubber gasket the cardboard gasket and the basket nut torque it down until all the excess putty comes squeezing.
Do you use plumbers putty on tub drain?
The drain is secured to the tub by screwing the drain basket down from inside the tub but requires sealant. Sealing an existing or new drain basket is easily done with plumber’s putty.
What is a drain flange?
A drain flange sits within a drain to provide attachments for plumbing fittings. The edge of the flange should be visible as a lip around the edge of the drain, and a short length of pipe drops out to connect with the plumbing.
How do you replace a shower drain flange?
Quote from the video:
Quote from Youtube video: So as you screw this down into here it tightens up this flange in the pipe area and keeps the water from going into the lower floor of your apartment or a house.
How do you remove a shower drain flange?
Quote from the video:
Quote from Youtube video: Pipe you can pull up the entire unit you could try to wiggle. At that gasket out with a needle nose pliers. And a flat head screwdriver.
What is a tub drain assembly?
A bathtub drain assembly is a series of plumbing parts that transport the waste water from a bathtub, feeding the water into a large drainpipe. The bathtub drain assembly is made up of its own series of pipes that are interconnected, and also connect to the large drainpipe.
Is tub overflow necessary?
Depending on the style of bathtub and its use, having an overflow drain is not always necessary. If your bathtub is a shower/bathtub combo or if your bathtub is a smaller model, then having an overflow drain isn’t necessary. Installing an overflow drain is also a bit more involved than installing a standard drain.
Does a bathtub need a vent?
Whether you’re putting in a tub, toilet, sink, or floor drain, they all need a plumbing vent on the drain to make it work properly. If there is no vent, a number of problems may occur: The fixture without a vent may drain slowly. The drain will likely make gurgling noises.
What is a bathtub overflow drain?
Quote from the video:
Quote from Youtube video: Связанные запросы
