There is nothing wrong with this and whether the holes are in the side, back or bottom of a cabinet is entirely related to where the utilities are located and the ease of bringing them in.
Where do you drill holes in dishwasher for cabinets?
Drill Holes in the Cabinets
Before you can install the drain hose and water line to the dishwasher, you’ll need to drill two holes in the sink base cabinet. For the drain hose, this is a 1 1/2-inch hole located near the back of the cabinet and as high as possible without hitting the sink.
How do you install a dishwasher in an existing kitchen cabinet?
Quote from the video:
Quote from Youtube video: All right now we can work on the cabinets. As you can see these were built in place they weren't bought at a box store or anything like that. So we need to take our time and try and get it out in one.
How do you cut a hole in the bottom of a cabinet?
Quote from the video:
Quote from Youtube video: And 3/8 I'm hooked on the edge of the cabinet. Now I take my tape measure and go on the inside. That translates into 18. And 7/8 from the inside of the cabinet.
Can you put a dishwasher under the sink?
Tuck it underneath the sink: Opt for a single-bowl sink and integrate the under-sink dishwasher, beneath the countertop to the side of the bowl and the sink’s piping.
Where do you put a dishwasher drain hose?
Quote from the video:
Quote from Youtube video: It's on the left side rear of the unit.
Can you install a dishwasher anywhere?
Dishwashers can be located away from the sink cabinet, but generally they need to be within a few feet so the sink plumbing can be used for the water supply and drain. I’ve built plenty of U-shaped kitchens where the dishwasher front was 90 degrees to the sink cabinet face.
How much space should be between dishwasher and sink?
Sink and Dishwasher
Install the nearest edge of the dishwasher within 36 inches of the nearest edge of a sink, preferably the primary prep sink. Also, leave at least 21 inches between the dishwasher and any adjacent appliances, cabinets, or other obstacles.
How far away from the sink can you install a dishwasher?
How Far Can a Dishwasher be From the Sink? Most dishwashers can be placed as far as 12 feet from the sink. This maximum is established by the length of the drain hose that is included with most dishwashers.
Does dishwasher have to go next to sink?
Dishwashers should be placed next to the kitchen sink – either on the right or left-hand side – as well as being close to storage units. It is also important to ensure that your dishwasher placement allows freedom of movement.
How do you install a dishwasher outlet under the sink?
Quote from the video:
Quote from Youtube video: That are attached to the outlet on the yokes of the outlet. You use those screws to attach it to the box by simply screwing those screws into the screw holes on the box.
How do you hook up a dishwasher drain to a kitchen sink?
Quote from the video:
Quote from Youtube video: So it's always a good idea to bleed your valve before you connect the new supply. Line. Cut my extension pipe to size and I'm going to slip it up I've got a nut in the washer above it.
Does a dishwasher drain hose need to be elevated?
A high loop prevents waste water back flowing from your sink to your dishwasher. If the drain hose is not elevated, there is a potential for water to run the wrong way through your drain hose and can cause standing water at the bottom of your dishwasher.
Why does dishwasher drain hose need a high loop?
Bosch: The high loop in the drain hose of your dishwasher is to keep water from settling in the hose if it were hanging down any lower or horizontally. This keeps the drain hose dried out and keeps any odors from backing up into the dishwasher.
How far can you run a dishwasher drain hose?
The dishwasher must be installed so that drain hose is no more than 10 feet in length for proper drainage. The dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure. Follow local codes and ordinances. Do not connect Do not exceed 10 feet distance to drain.
Does a dishwasher drain need a vent?
If the hose connects after the P-trap, sewer gasses can flow up into the dishwasher hose and into the dishwasher. Why do you need to vent a dishwasher? Venting a dishwasher keeps any dirty drain water from returning to the dishwasher or going into the freshwater supply.
Why does my dishwasher drain into the sink?
One such reason for your dishwasher backing up into your sink may be that you have a clog in your garbage disposal. This usually only happens after your garbage disposal is newly installed, but it can happen even if you have had the disposal for a while. To fix the problem, simply remove the drain plug.
How do I connect my washer drain hose to my sink?
How to Connect Washing Machine Drain Hose to Sink
- Step 1: Inspect your sink underside. …
- Step 2: Connect the drain hose to the sink plumbing system. …
- Step 3: Fasten the hose into place. …
- Step 4: Position the drain hose to sink. …
- Step 1: Configure the Waste Pipe. …
- Step 2: Attach Spigot Using Jubilee Clips.
