Having the switch for the outlet on the inside of the house, @AzorAhai-him-, prevents people from “borrowing” electricity from the outlet outside.

Why are some outlets controlled by a switch?

A switched receptacle allows you to control one outlet with a switch while the other remains hot. Here’s how to do it safely on your own. A receptacle can be split so a wall switch controls one of its outlets while the other is hot all the time.

How does a switch controlled outlet work?





At the receptacle, the red connects to the top half of the outlet. The black cable wire runs from the switch to the bottom half of the outlet. With this arrangement, the bottom half of the outlet is controlled by the switch and the top half is always hot.

Can I get power for an outlet from a switch?

Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.

What does a controlled outlet mean?

A simple strategy involves Receptacle Control also known as Plug Load Control which automatically turns off plug loads when a space is vacated. What are Plug Loads? Plug loads include devices that plug into a standard electrical outlet, often called “standby” or “vampire” loads.

What is an outlet controlled by a switch called?

switched outlet





A switched outlet is an outlet in your house controlled by a light switch. Turn the light switch on, and the power to the outlet is on, turn it off, and the power is off. Odds are, you have one somewhere in your house.

How do you install a switch outlet combo?

Quote from the video:
Quote from Youtube video: One black hot wallbox wire clockwise 3/4 of a turn around the black common terminal screw next to the switch. Tighten firmly next loop the second black hot wallbox wire clockwise 3/4 of a turn around.

How do I make my outlet always on?

What you need to do is create a parallel circuit. As always, turn off the circuit breaker for that switch before any changes! For the outlet to be a permanently on, non-switch circuit, you need to bypass the switch. As @JimmyFix-It has said, you need to tie the Red wire and the Black Wires (Live) together.

How do I change an outlet to a switch?

Quote from the video:
Quote from Youtube video: In you can use a drill or a driver to do this if you've got one and that will make the job a little bit faster.

Where are controlled receptacles required?



The Energy Standards require both controlled and uncontrolled 120-volt receptacles in lobbies, conference rooms, kitchen areas in office spaces, copy rooms, and hotel/motel guest rooms.

Which of the following rooms is not permitted to have a switched receptacle for a lighting outlet?

Now, at least one wall switch–controlled lighting outlet is required in every habitable room, kitchen, and bathroom. The following two exceptions were unchanged: Exception No. 1: In other than kitchens and bathrooms, one or more receptacles controlled by a wall switch are permitted instead of lighting outlets.

How do you wire a controlled receptacle?

Quote from the video:
Quote from Youtube video: First i'll connect the white neutral wire to either of the silver colored neutral terminals. And i'll tighten it down securely.

How do I wire a receptacle from a light outlet but keep it hot when light is off?



In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.

What is required of an outlet that will be controlled by an automatic device?

A nonlocking type, 125-volt, 20-ampere receptacle that is controlled by an automatic control device. All receptacles.

Can a GFCI outlet be switched?

No. GFCIs receptacles cannot be switched, nor can they be split. Best bet is to use a GFCI breaker in the panel, then you can use regular receptacles that you can split and switch, and everything will be protected.

How do I wire a switch to control a GFCI receptacle?

How do I wire a switch to control a GFCI Receptacle?

  1. Place the switch in the hot wire going to the “line” side of the GFCI outlet.
  2. Run the neutral wire uninterrupted to the “line” side of the GFCI outlet.
  3. Connect ground wires as usual, switch and outlet.



Do all outlets in kitchen need to be GFCI?

Not all your kitchen outlets need to be the GFCIs, but they are required to be if they’re within six feet of a kitchen sink or if they serve a countertop. Near laundry room sinks. Any receptacles within 6 feet of a sink or washing machine should be GFCIs.

Do all outlets in a bathroom need to be GFCI?

Where Should GFCI Outlets Be Installed? Bathrooms – All bathroom receptacles should have GFCI outlets installed. Garages & Sheds – Any area inside or outside of the house that is not considered a “habitable” room should include GFCI outlets. This includes garages, sheds, and any other work/storage areas.

What is the difference between a GFI and a GFCI?

Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

Can bathroom lights and outlets be on same circuit?



The main rule in 210.11(C)(3) states that the branch circuit provided to supply the bathroom receptacle outlet(s) shall have no other outlets. No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles.