Do I need a relay for pod lights?
If you are using a light pod that does not have a very large amp draw, you may not need a relay switch, but if you are using a larger LED light bar, they are a must have. To begin with, look at your relay switch and notice the four prongs on it marked 30, 87,85, and 86.
How do you wire a pod with lights?
Quote from the video:
Quote from Youtube video: If you wanted to just squeeze this tab you can separate this have your switch inside your vehicle obviously. Then you can run your wire.
Do LED lights have to be wired a certain way?
In short, yes, LED bulbs have polarity. They are made with a positive and negative connection. They should be wired into your circuit in the correct direction, or they won’t work.
How do you aim a light pod?
To aim LED light pods equipped with a flood beam you can either have them both facing straight forward. Or you can use them as LED ditch lights by having them facing straight but slightly outwards to increase the amount of LED light that is on the side of the road.
What is a pod light?
LED light pods are a great way to add additional spot, fog, DRL, and driving light to your personal vehicle or work truck. Light pods are easily mounted to trucks, jeeps, ATVs, boats, motorcycles, or other vehicles with ease.
How do you connect LED pods to fog lights?
Quote from the video:
Quote from Youtube video: End so that you could use that female. And then you could just go ahead and wire the male. End into your your pod lights right here you can go ahead and splice and connect.
How do I aim my motorcycle lights?
Quote from the video:
Quote from Youtube video: If the center of the light is located at 40 inches or above. Ground then the cutoff line should be 3 inches below at 25. Feet. Away high beam lights or long range auxiliary lights should be level.
How do you aim spotlights?
Quote from the video:
Quote from Youtube video: Run a horizontal line all the way across and to get that extra bit of accuracy measure from the center to the center of your driving lamps. Which is 55 go to the wall measure the distance.
Where should auxiliary lamps be directed?
8) Auxiliary headlamps
- Shall be wired independently and shall have separate switches.
- Shall be directed downward but in no case towards the left side of the vehicle.
- must be white or selective-yellow in color.
- Shall be mounted in such a way that it will not be disturbed by vibration or shocks.
How do I put the pods lights in my Jeep?
Quote from the video:
Quote from Youtube video: Super simple now over here for the pods these are the brackets that we're gonna be using to mount them underneath. The windshield. And for the wiring I found this on Amazon.
How do you install pod lights on a Jeep Wrangler JK?
Quote from the video:
Quote from Youtube video: And this is how it's going to go our first step is going to be taking the two mounting brackets laying them on top of each other mounting. Them up to your bracket.
