How do you fix a pop-up bathtub plug?

Quote from the video:
Quote from Youtube video: Are different sizes make sure you take it with you to match it up get yourself a new one reinstall that use your screwdriver to tighten it into place reinstall the top cap.

How do bath pop-up plugs work?





A bathtub pop-up is a two-part mechanism: first, the stopper, which has a rocker arm that extends back toward the drain, and second, the overflow assembly, a lever that lifts or lowers a rod with a spring-like end.

How do you fix a spring loaded pop-up sink plug?

Quote from the video:
Quote from Youtube video: So what we typically do I would vies people to do is. You can just twist. This little plug piece it just spins. So loose right there. And it just comes off you just put that aside there.

How do you fix a twist handle bath control mechanism?

Quote from the video:
Quote from Youtube video: If we take it off you can see it's actually just a screw on the top there. That's have to be coming loose.

How do you remove the tub plug that twists up and down?

Quote from the video:
Quote from Youtube video: Then take a pair of pliers or a flathead screwdriver and remove the stem in the event the knob comes off but the stem stays in the drain. Take a flathead screwdriver. And turn counterclockwise.

Why won’t my pop up plug stay down?





If the stopper moves as it should but doesn’t stay put, all you need to do is tighten the nut (turn it clockwise). If the action is too stiff, loosen the nut a little. Check the action and adjust until it feels about right.

How do I remove a lift and turn stopper?

Quote from the video:
Quote from Youtube video: Well try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself will loosen from its base as you'll see here.

How do you remove a pop up drain stopper?

Pop-up

  1. Technique #1: Grasp the drain stopper by squeezing each side. Pull the drain stopper up until it comes out. …
  2. Technique #2: Twist counterclockwise to unscrew the cap. Next, use a screwdriver to unscrew the base underneath. …
  3. Technique #3: This works for a rocker arm pop-up stopper.