This could be a jam, a problem with the belt, an air filter issue, or the motor itself could just be dead. If both the fan motor and the compressor coils are silent, then the whole unit isn’t getting power. First check the circuit breaker, then you can see if the contactor is working properly.

What would cause the blower motor to stop working?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

How do I reset my blower motor?





Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

Why does my blower motor only work on low?

When a blower resistor fails, the highest fan speed usually is the only one that still works because it essentially bypasses the resistor and receives the maximum amount of voltage. When the resistor is working, it reduces the amount of voltage going to the lower fan speeds so the fan runs slower.

What are the signs of a failing blower motor?

What Are Signs Your Blower Motor Needs to Be Replaced?

  • Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem. …
  • No Airflow At All From Vents. …
  • Skyrocketing Energy Bills. …
  • Strange Noises When You Turn on the Heat. …
  • Overheating Blower / Weird Smells.


How do you tell if it’s the blower motor or resistor is bad?





A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower motor resistor is the component directly responsible for controlling the blower motor fan speed. If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed.

Is there a fuse for blower motor?

To protect the blower motor power circuit, a 20-, 25- or 30-amp fuse is usually located in the fuse panel under the dash. The rating of the fuse will depend on the vehicle application and how much power the blower motor requires at full speed.

What does blower motor reset button look like?

These blowers can be VERY hot. Step 4: Locate the reset button. This is usually on the side or the back of the blower motor. Often times, this button is red.

How do you test a blower motor?

Quote from the video:
Quote from Youtube video: It's two little prongs inside of her. So what you want to do basically is just take one end don't let these two in touch together will be the same sparks as if you was touching.

How much does it cost to replace a blower motor?



A blower motor replacement costs $300 to $900 on average if not under warranty or $200 to $400 for labor when under warranty. Replacing a large or variable-speed HVAC blower motor costs $600 to $1,500. Furnace or AC blower motor prices are $100 to $500 on average for the part alone.

Can you drive without a blower motor?

Your car’s blower motor is not only necessary for the operation of your air conditioner. Without a functioning blower motor your engine runs the risk of overheating.

How much does it cost to replace blower motor resistor?

The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125.

How much is a fan blower resistor?



A blower motor resistor costs anywhere between $1 and $400. Factors that can affect its price include its condition, configuration, material, and set or kit inclusions. Labor may cost you an extra $45 to $55, depending on your area.

Can you repair a blower motor?

There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it’s a fairly straight forward repair.

How long should a blower resistor last?

The blower motor resistor is designed to last for the car’s lifespan. In most cases, these resistors will wear out long before the car does. Usually, the wear that the blower motor resistor has is due to the constant use that it gets and the heat that it is exposed on a regular basis.