How do you remove a stubborn faucet cartridge?
Quote from the video:
Quote from Youtube video: Let that set up for a few minutes tap on it a little bit. Then you don't want to get a large pipe wrench I use like a 16 or 24 inch pipe wrench to back it up. Then I take my nip X pliers wrench.
How do you remove cartridge nut from faucet?
Quote from the video:
Quote from Youtube video: By turning them counterclockwise.
What is the purpose of a cartridge in a faucet?
The cartridge is a plastic piece in the faucet that controls water flow. Worn cartridges or rubber O rings often lead to leaks. By swapping in replacement parts, your faucet won’t leak at the base or around the handles anymore. Replacing a faucet cartridge is a plumbing fix you can do in less than an hour.
How do you remove a kitchen faucet cartridge?
Quote from the video:
Quote from Youtube video: First you will need to turn off the hot and cold water supply valve under the sink. Next you will need to remove the single lever handle. This may require using an allen wrench to loosen the handle.
How do you get a stuck Moen 1222 cartridge out?
Quote from the video:
Quote from Youtube video: And they're like needlenose they're they're very small so they can get in there and grab that and then on top of that I put a crescent wrench so that I could have some leverage to move it left.
How do you get a stuck Moen 1224 cartridge out?
The official instructions for removing the Moen 1224 cartridge are to remove the retaining nut and then simply pull up with a pair of pliers on the cartridge to remove it.
How do you remove cartridge from faucet without tool?
Quote from the video:
Quote from Youtube video: So what I'm doing is I'm putting a screwdriver on each side you just have to break that you have the let's see once you have the c-clip out I'll put it right there so you can see that goes on the top.
How do you remove a plastic faucet cartridge?
Quote from the video:
Quote from Youtube video: Use a crescent wrench to remove the bonnet nut from the cartridge. Once the nut is off remove the cartridge if you need extra leverage. Use the pliers to pull on the stem.
How do you remove a Moen nut cartridge?
To remove the cartridge from your faucet assembly, first hold the handles steady and unscrew the handle hub counterclockwise. Once the handle hub is loosened completely, pull the handle off the valve assembly. Then, loosen and remove the nut from the cartridge using pliers.
How do you remove the cartridge from a Moen kitchen faucet?
Quote from the video:
Quote from Youtube video: Especially in an older faucet like this if there's a buildup of calcium lime and rust. And you force in the new cartridge. It can very easily. Put a divot in these little ol rings.
How do you remove an American standard kitchen faucet cartridge?
Quote from the video:
Quote from Youtube video: Take off the cover to the handle screw kit and with a 2.5 millimeter hex wrench take off the faucet handle. With the handle off gently pull off the cap.
Why does the faucet leak after replacing cartridge?
The reason why a cartridge faucet leaks after replacing the cartridge can vary based on your water quality, the age of the faucet, and the type of cartridge. First, the leak may not have been caused by a faulty cartridge. Water is full of calcium and other minerals that make it highly corrosive.
How do you remove cartridge from faucet without tool?
Quote from the video:
Quote from Youtube video: So what I'm doing is I'm putting a screwdriver on each side you just have to break that you have the let's see once you have the c-clip out I'll put it right there so you can see that goes on the top.
