Why is my Kasa Smart switch not working?

To reconnect to the WiFi, try going through the setup process again in the Kasa Smart app. If that doesn’t work, it means the signal is too weak to reach your TP-Link smart switch. In that case, you might want to try moving your router closer to the switch, or if that is not possible, try using a WiFi extender.

Why is my smart light switch not working?

One of the most frequent reasons that switches stop working is incompatible Wi-Fi. Many newer routers use a 5 GHz signal by default, which means some older 2.4 GHz switches will not connect after a router upgrade. In this case, you either have to switch off 5 GHz or replace older 2.4 GHz switches.

How do I reset my Smart switch light?

Quote from the video:
Quote from Youtube video: Just press and hold the easy setup button for 10 seconds. The device's led will blink red the led light will turn off once the reset is complete to reset a gateway.

Where is Kasa switch reset button?

With your TP-Link Kasa smart plug still plugged into the power outlet, locate the reset or control button. Depending on the model of plug you have, the button may be on the top or the side of the device. Press and hold the button for 5 seconds. The Wi-Fi LED light should blink amber and green.

How do I reset my TP-Link light switch?

Press RESET button and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. 3. Press RESET button and hold (about 10 seconds) until the Wi-Fi LED blinks green rapidly to factory reset the Smart Switch.

How do I program my Kasa Smart switch?

Login to the Kasa App with your cloud account.

  1. Add your Smart Plug on Kasa APP. …
  2. Follow the instruction on the Kasa app to power on the HS100, wait for the Wi-Fi light blinking orange and green. …
  3. Connect your phone to the Smart Plug Wi-Fi. …
  4. Name your smart plug.
  5. Customize an icon for this Smart Plug.

Why won’t my light switch turn off my light?

The most likely error is that the wire going to the light that stays on is contacting one of the live wires. To check, disconnect all the wires from each other, turn on the breaker and use a voltage tester to identify the live circuit wire.

How do I know if my smart switch is bad?

Here are four more signs that a light switch has gone past its prime.

  1. Finicky light fixture. We’ve all had that one light switch that just doesn’t work right. …
  2. The switch sparks. On occasion, you may see a small spark when you flip the light switch off. …
  3. Noisy switch. …
  4. Switch is warm to the touch.

What happens if you wire switch wrong?

If you damage the wires during installation, you could break the switch, or the wires could come loose. Loose wires present a danger when changing the light switch. Thirdly, you could create a short circuit in the switch. A short circuit can cause the breaker or fuse to pop.

Why is my Kasa Smart switch blinking green?

If the green light is blinking it means the switch has lost connection to the internet. It shouldn’t work if not connected.

Where is the reset button on Kasa smart plug?

Quote from the video:
Quote from Youtube video: This is the the box that it came with this is a very popular smart plug. And so what happens if you want to reset it because you have no button here except for this button right here.

How do I reconnect my Kasa light switch to Wi-Fi?

Quote from the video:
Quote from Youtube video: Store just search tp-link in casa k-a-s-a. And then download and set up that app so we've already done that and now to add a device all we're going to do is click in the upper.

Why is my smart switch red?

Wi-Fi Disconnected Indicator

If enabled, the Light Ring or LED status indicator will turn red if the switch loses it’s Wi-Fi connection.