How do you connect kitchen sink pipes?
Quote from the video:
Quote from Youtube video: Now at a washer making sure the taper is toward the end then fit into the marble connector loosely without tightening the nut. Next attach the p-trap to the trap arm loosely thread these connections.
How do I connect my plumbing sink drain?
Quote from the video:
Quote from Youtube video: To assemble your new pop-up drain start with applying teflon tape to the top portion of the drain body and a small bead of plumbers putty around the drain. Flange.
What do I need to hook up kitchen sink drain?
To install a kitchen sink drain, you’ll need a drain assembly kit that fits your sink, pliers, a basket wrench, plumber’s putty, and a brass tailpiece to attach the basket strainer to the main drainpipe. You’ll need to disconnect the drain pipe and remove the existing strainer if you haven’t already.
How do you connect metal pipes under sink?
Quote from the video:
Quote from Youtube video: This right here is the key to hooking it up going through the wall. This is a flexible pipe. That we can hook up straight to our line right here. So we'll take it and tighten it down to our. Line.
What if new kitchen sink drain doesn’t line up with existing pipes?
In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.
Should I use metal or plastic P trap?
P-traps can be plastic or metal. The plastic ones are corrosion resistant and easier to install, so are more commonly used. It isn’t an issue if the two components are made of dissimilar materials, because the flange that seals the trap opening is always plastic. So don’t be intimidated.
How do you join plumbing pipes?
Quote from the video:
Quote from Youtube video: We need to glue in using some solvent well good the top of something world globally usually cost you between eight and ten pounds. But last year ages. So it's well worth the investment.
How do you connect galvanized pipes without threads?
Use a stainless steel coupling if the galvanized pipe is in a damp position to avoid problems associated with rust. Unthreaded galvanized pipe connects together using a coupling. Connecting together galvanized pipes that are non-threaded uses a coupling that creates a sealed joint.
How do you install a sink drain that doesnt line up?
Quote from the video:
Quote from Youtube video: The drain pipe coming out of the wall to one and a half inch PVC pipe from the Builder. So what I have here is this is a one and a half inch. This is a flush inside coupling. So this will cement.
What to do when P-trap doesnt line up?
If the tailpiece will not line up with the trap, move the trap into its original position, tighten the collar with the pipe wrench and obtain a flexible tailpiece extension for your drain. The size is typically 1 1/4-inch in the outer diameter of the plastic pipe.
What to do when P-trap doesn’t line up with drain?
Quote from the video:
Quote from Youtube video: In an ideal situation that drain coming out of the wall will almost align with the sink drain. And you will install it by just offsetting the p-trap. But if you remodel your bathroom and drains are
Does P-trap have to be below drain?
It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.
Should faucet line up with drain?
Ideally, the flow of water from the faucet should go down the drain. Don’t forget that the faucet usually sits back either on the sink rim if it’s a drop in or a bit farther back it it’s a deck mount.
Do flexible P traps work?
P-traps take on and maintain the shape of a letter p to keep sewer gases out of your house. When you use a flexible p trap, you’re more likely to get the shape wrong, and you’re more likely to accidentally misshape it when you bump the pipe. Or when you bump it, the force might cause it to spring a leak.
Can flex pipe be used under sink?
Installing flexible drain fittings is just as easy as installing any of the other tubular piping under the kitchen, bathroom and laundry sink. They are held together with the slip joint nuts and washers that make installing and removing them quick and easy.
Are flexible drain pipes good?
The zigzag sides are great for slowing down the flow of water and letting the gunk sit and collect. Making matters worse, since they slow down the flow of water, gunk can easily collect further down the pipe, especially if they pipe already isn’t 100% clear.
